What do you mean? Where can i find b3601?
Type: Posts; User: LSs1Power; Keyword(s):
What do you mean? Where can i find b3601?
I changed the first page setting to Gasoline and it worked just fine.
I guess LC1 setting did change by itself.
Thank you
It took me a while to find an adapter to to convert Serial to USB.
Here is the screen shots
I will try to access the LM Programmer again.
Which end should I connect the laptop to, IN or OUT to read from the LC1 Module Right through the serial connection?
Attached you will find the log file.
I will have to make another log to capture all the variables you wanted below.
My LMprogrammer doesn't work. I have never accessed the LM Software before....
Yes, nothing changed from before. Everything was working fine and reading as the Dynojet AF gauge. All of the sudden it started reading off. I'm not sure if it is the Oxygen sensor being off or...
My A/F is reading 5 AF which is not right. The Lambda is reading 1.0 around idle like before when it was reading 14.5-14.7 AF.
I re-calibrated the sensor and it is still showing 5 AF. Is there a...
Yes the problem was the number of channels i had. Now its logging just fine with no lag.
My driver clicked the calibration button in the LC1 by mistake when he was washing the car and now the...
Which TP% PID reading shows the full 100% when WOT?
SAE.TP shows only 83.9% at WOT now.
How do you adjust number of channels?
Today for some reason the Real Time monitoring or Recording is lagging and freezing. Attached you will find log files that shows the problem.
I wonder what made this occur today. I tried...
I love you guys :)
I can't believe that this little dead end plug is whats needed to make this work. It doesnt make sense to me, but what do i know. As soon as i plugged it, the 2nd from left...
Maybe I'm not understanding what a terminator plug looks like.
Are you saying that both IN & OUT from the LC1 should be connected at the same time, one to the Null Modem going to RS232 and the...
Here is another photo showing the plug that i usually connect to the LC1 OUT and the other side that goes in the RS232
Yes i do have the adapter between the LC1 and V2.
Yes i did plug it in OBD-II Port while the car is running.
The laptop was not connected to the V2 at that time.
Im attaching a picture of...
I did exactly as specified in your instructions with no luck. It is so frustrating.
I found the Config folder under C>ProgramData>EFILive>V8>Config
That is the only different thing i did from...
Unbelievable... i tried everything to make the null modem to work. There is no activity between the LC1 and V2 through the serial connection.
The analog signal is reading properly now between...
What is the difference between ACProgV2_06_35.efw vs FSProgV2_06_35.efw?
I have FSProgV2_06_35.efw in my firmware now.
At last, i just received my Null Modem. Before i go ahead and try it out, i wanted to check over one last detail which is the latest or needed Bootblock & firmware to make this work.
Now i have...
I bought the null modem. Just waiting for it to arrive.
Until then, what firmware & Bootlock should i have in the V2 to ensure that this functionality works?
Aha... I'm assuming i have to buy it from our fellow member on this forum and I will not be able to find it in any hardware store.
The adapter will allow two male serial ports to be merged. It has a sticker on stating "Mini Gender Changer" LMAO. It looks the same as pictured in the post you referenced.
Also something...
Good news... The analog route worked and it is showing me movement in the AD1 an average of .55 and a max reading of 1.09.
Now i need to find a way to translate that into a custom PID so i can...
Good news... the analog readout works which means that the serial way didn't work for me.
Now i have to find a way to change the reading from 0-1 and translate it to 7-22 A/F
Ok so far i checked all PIDs with serial connection and there is no activity on the scanner or the PC.
Im going to try the analog route now to see if I can get some activity to the V2 software at...