Hi there , sorry for late reply .
The tables that mention the DTC failure are for speed density - mafless . When you fail the MAF these tables are used . Secondly if you want to keep the MAF you...
Type: Posts; User: hymey; Keyword(s):
Hi there , sorry for late reply .
The tables that mention the DTC failure are for speed density - mafless . When you fail the MAF these tables are used . Secondly if you want to keep the MAF you...
Hi lbl . Getting the idle is straight forward and quite fast , regardless of maf or speed density . A lot really focus on fuel maps to help with these issues . I find if the idle is correct and setup...
Hi 5557 nut , I have just downloaded Tapatalk ,
Makes it easier !!!! Max idle air set to high . Or another high limit .
Hi mate, I have not downloaded your tune, however there is a VVE tutorial on here, also look at the e38 idle page on the last Cpl pages should help you.
Joel
Thanks Blacky , I have updated and now 166 is installed. I'll see if it works now !
Cheers
Sent from my SM-A705YN using Tapatalk
V7 software is V7.5.28
V8 software is 8.2.24
Current boot block is 2.07.008
Current firmware is 2.07.164
Regards
Hey Blacky,
I will check for you once I get back from the beach. I only just bought the new V2, Donna sent it a couple weeks ago. I installed latest public version last Saturday whilst I had car...
Hey guys, I am running the latest public version. The firmware is up to date. I presume I need to update to the beta version in the link provided. Will this require me to update firmware again or...
Hey guys,
I just purchased my replacement V2 scan tool and can now tune can vehicles again. Thanks for the fast turn around!
Question on logging in particular . I have installed the latest...
Nice mate
I generally find the same 60 is a bit to high. All different but generally 50 is pretty close to the bottom but less will work fine too.
Sounds like min idle air is about 0.5 sec to...
Trecool , yes I have found that, GMs weird way of doing things, the low value decimal multiplier has to stay.
A good give away is cranking idle air and corresponding TB percentage. Change the...
Hi guys, instead of using the max idle area I now use the tables B1703 and B1704, these are hard upper and lower limits. As mentioned , when I first started this procedure these values were not...
I have fixed this now, something to do with OneDrive syncing
After installing the latest versions of 7.5 and V8 on my laptop (new no previous installs) an error comes up that v7.5 is missing calc pid file . Anyone seen this? I have tried removing the program...
If the timing swings dig a bit deeper there.
Sent from my Pixel using Tapatalk
That's OK if you drill a hole. It won't matter, regardless what anyone says. The fitting in the manifold is basically a hole. If you block that , that changes the idle aswell.
The hard limit Is...
With the later os, the hard limit in the tune for idle has been increased from 60 to 200. This has been in efilive for sometime. It used to only be in HP tuners. So I would not drill a hole unless...
Thanks, my apologies it's the opposite end of the tool. The RJ45 female. And also require a new cable. I'd do it myself but I don't have the time atm.
I have some issues with my flashscan with the USB port.I want to send back for repairs. I have been asked to create a RMA case. I have asked support how to and no reply. I have done some searches on...
thats typical of mafless e38. Its a combination of dynamics pe enable
lol not on my shitty phone
Guys. I haven't had any access to my laptop or PC. It will be a few months until its complete
All good mate. Enjoy the hot WA summer
237 242 is a texas speed cam ? Thats 286 deg advertised duration. Half that is 143 degrees. Take that from 110 intake centreline. The inlet opens at minus 33 degrees btdc overlap . Add 360 to get it...
Awesome. Glad I could help. Injector timing is critical. If you can supply me your cam specs I can get the value better
Good work
Joel