Search:

Type: Posts; User: izaks; Keyword(s):

Page 1 of 14 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thread: E38 problems

    by izaks
    Replies
    3
    Views
    105

    $0032 EFILive_Hapi did not start;...

    $0032
    EFILive_Hapi did not start; EFILive_Hapi.exe not found.
    Windows cannot locate the path to the EFILive_Hapi.exe file. It should be installed into the EFILive V8 “Program Files” folder....
  2. H0102 in mine is also 36 Sleep tight !

    H0102 in mine is also 36
    Sleep tight !
  3. Changing H0136 in the ECM and TCM worked for me....

    Changing H0136 in the ECM and TCM worked for me. I now have less than 1km/h difference from 80 120 km/hr speedo vs GPS
  4. I have no experience with 4wd, but it seems...

    I have no experience with 4wd, but it seems strange that H0152 and H0153 differ so widely
  5. 100.57 630.0 for 32" diameter

    100.57


    630.0 for 32" diameter
  6. 632 100.26 For 31.9 diameter

    632
    100.26
    For 31.9 diameter
  7. Yes metric

    Yes metric
  8. Forget about using the speedo calculator - it...

    Forget about using the speedo calculator - it never works
    Where did the value in H0135 come from ?
  9. Try the following settings and let me know GPS...

    Try the following settings and let me know GPS and speedo readings
    H0105 = 391.3
    H0136 = 391.3
    H0139 = 2556.1
  10. Apologies Reduce H0136 and increase H0139 by 1%...

    Apologies
    Reduce H0136 and increase H0139 by 1% at a time and see what difference it makes
    Otherwise increase H0136 and decrease H0139
  11. Try increasing H0139 / H0136 by 1% at a time and...

    Try increasing H0139 / H0136 by 1% at a time and see what difference it makes
    If it goes the wrong way decrease them
  12. With the E38 / T43 combo, you have to make...

    With the E38 / T43 combo, you have to make changes to both ECM and TCM (both the same steeings) to get the speedo to match the GPS
  13. Open your TUNE file with EILive. Click on the...

    Open your TUNE file with EILive.
    Click on the open folder with red arrows (CTRL + F11)- to open you friends file for comparison - if you get no error about incompatible operating system, you should...
  14. Thread: Sae.map

    by izaks
    Replies
    2
    Views
    299

    Thanks very much (was trying to accurately...

    Thanks very much (was trying to accurately calibrate a 3 bar map sensor)
  15. Thread: Sae.map

    by izaks
    Replies
    2
    Views
    299

    Sae.map

    Trying to get SAE.MAP to display/log one decimal place
    Changed UMN-08-101 fmt to .1 and .2
    No change, only displays whole number
    Any idea's ?
  16. Thread: VVE Questions

    by izaks
    Replies
    11
    Views
    2,309

    Log GM.APP if you want to see 0 - 100% TP and...

    Log GM.APP if you want to see 0 - 100% TP
    and GM.THRA_A if you want to see what the TB is doing
  17. Replies
    56
    Views
    25,627

    It makes some sense when you compare the injector...

    It makes some sense when you compare the injector flow base of non FSCM and FSCM equipped cars
    FSCM cars have a fuel pressure sensor and the IFB caters for boost, which the non FSM do not

    NON...
  18. Replies
    56
    Views
    25,627

    I know this is an old thread, but Here are...

    I know this is an old thread, but

    Here are some results of testing Holden's fitted with the E38 (all at altitude KOEO 84-85 kpa)

    If the car is not fitted with an FSCM, INJPDELTA will not...
  19. Replies
    40
    Views
    20,356

    If D9420 is the problem, I have checked VE,...

    If D9420 is the problem, I have checked VE, Maloo, CTSV, and Camaro , and the are all set to 0 for 5th and 6th at 3000.
    The Camaro ZL1 is set to 575 for 5th and 0 for 6th
    Not able to test at the...
  20. I set B5145 to 1 at only 80% and B5114 to only...

    I set B5145 to 1 at only 80%
    and B5114 to only pull timing greater than .50 G/CYL
  21. Thread: Nw102 07 zo6

    by izaks
    Replies
    1
    Views
    400

    Using 6000 on a 6.8L LS3 S/C and cam with 102mm...

    Using 6000 on a 6.8L LS3 S/C and cam with 102mm with good results (proportional and integral standard)
    I also lowered B1651 and B1652
  22. Replies
    4
    Views
    844

    I logged GM.AIRPERSEC, and it logs past the...

    I logged GM.AIRPERSEC, and it logs past the 655.35 limit
  23. Replies
    4
    Views
    844

    Sorry, SAE.MAF

    Sorry, SAE.MAF
  24. Replies
    4
    Views
    844

    Air Flow Rate limit

    PID: Air flow rate from Mass Air Flow sensor (Grams/s) maxes out at 655.35 . I have increased the value of UNM-16-11 (gps), but it made no difference to the logged maximum of 655.35
    6.8L...
  25. Replies
    4
    Views
    942

    Only have 12656930

    Only have 12656930
Results 1 to 25 of 334
Page 1 of 14 1 2 3 4