Search:

Type: Posts; User: Supercharged111; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    160

    That was me. More work to find the fix than do...

    That was me. More work to find the fix than do the fix. Here's what got me rolling:

    https://forum.efilive.com/showthread.php?28990-Vista-Requires-Digitally-Signed-Drivers/page2
  2. Oh yeah, I recall that being mentioned in my 1500...

    Oh yeah, I recall that being mentioned in my 1500 thread. And I lied, I'm going to pulley down after work today now that I know I have more than enough fuel for the job. I've got to wonder about the...
  3. Replies
    115
    Views
    15,862

    Yeah it was real bad. Another guy said he ran...

    Yeah it was real bad. Another guy said he ran this setup on a stock pump and maybe he did. Turns out my pump was a Napa replacement, so not apples to apples like I thought. Now I have fuel for days...
  4. Replies
    115
    Views
    15,862

    Popped an Aeromotive 340 in, massive overkill I...

    Popped an Aeromotive 340 in, massive overkill I know, but the truck instantly ran too rich for the wideband to read at WOT so I can pare back PE fueling to something more realstic, pulley down, and...
  5. Replies
    64
    Views
    38,239

    Sticky: Can we get this link plugged on the first page?

    Can we get this link plugged on the first page?
  6. This is good to know. I will first address my...

    This is good to know. I will first address my fuel delivery, head to lower elevation with as much margin as possible, then do the pulley. I really do think I have the margin in the MAF tables for it,...
  7. Replies
    115
    Views
    15,862

    Definitely considered bringing in PE mode sooner,...

    Definitely considered bringing in PE mode sooner, also thinking semi open loop in COS5 may be the answer here as well to give me something between closed loop and PE mode as those IATs start to...
  8. Replies
    115
    Views
    15,862

    I'll keep going with this thread. I recently...

    I'll keep going with this thread. I recently installed 42# injectors and a 2 bar MAP on this truck. When I went to a custom operating system, I saw this one only goes up to COS3. I decided to give it...
  9. Is it ideal to cap MAF usage at 80% or something...

    Is it ideal to cap MAF usage at 80% or something like most do with injectors? I know if the case of the flapper door air flow meters used by Toyota in the 80s their resolution sucked at the top end...
  10. So piggyback question now: the COS manual stated...

    So piggyback question now: the COS manual stated that you must disable the MAF for 2/3 bar applications. Is that because they anticipate you'll peg it? If you don't peg it, what are the drawbacks to...
  11. I went whole hog. 6 and 8 injector plugs were on,...

    I went whole hog. 6 and 8 injector plugs were on, but not seated. Also forgot to reinstall the vacuum reference line for the FPR, truck runs better than ever now with non-leaky injectors. Hot...
  12. I'll have to dig up the thread that broke it...

    I'll have to dig up the thread that broke it down. I believe they are 36# at 3 bar (GTP factory pressure) and 42# at 4 bar.

    Did some research, these injectors are 41.5# at 4 bar. Regardless of...
  13. Bosch 42# Injector Data Help Needed

    It seems every time I crack into either truck's tune I realize a jillion things I screwed up where I last left off. The 3500 is way less wonky and, surprisingly, it's more of a longshot being a mish...
  14. Replies
    9
    Views
    1,657

    What I was alluding to was, if hacking new PCMs...

    What I was alluding to was, if hacking new PCMs really does become cost ineffective, what's the next alternative in line? Will the standalone market explode? Will the internal combustion engine...
  15. Replies
    9
    Views
    1,657

    I wonder what's next. Remember when OBDI came out...

    I wonder what's next. Remember when OBDI came out and everyone thought the sky was falling?
  16. Yeah, I only milked this for how many months?...

    Yeah, I only milked this for how many months? Starting with crapped out HDD. Now I can finally swap injectors, MAP, and go COS to put the blower back on the dually. :rockon:
  17. So the above link didn't work for me. The F8...

    So the above link didn't work for me. The F8 temporary disabling worked, but after a reboot it wouldn't work. You'd have to F8 and disable digitally signed drivers every time you logged on which...
  18. Thanks to Statesman for shedding some common...

    Thanks to Statesman for shedding some common sense on this matter, google to the rescue.

    http://www.icas.no/no/filer/DisableDigitalDriverSigninginWindows7Vista.pdf
  19. Decided to take a mechanic's approach rather than...

    Decided to take a mechanic's approach rather than a tuner, borrowed a Snap On Solus and brought up my P1635 on Mitchell All Data. Turns out this code is set for either of the 2 5V reference circuits,...
  20. Hmm, just did some reading and I guess it's not...

    Hmm, just did some reading and I guess it's not the end of the world. I don't think I'll be able to open my old V7 files anymore? If not, I do have this HDD partitioned, could I have 2 versions of...
  21. I have a newer 7.5 I can install, but I'm not...

    I have a newer 7.5 I can install, but I'm not going any newer than that because I want to retain the ability to tune a Duramax for when I eventually get one. The thing that I don't get is that this...
  22. Can you tag people on this forum?

    Can you tag people on this forum?
  23. I really can't tell if it's installed and...

    I really can't tell if it's installed and unusable or what, all I know is that it doesn't work and I've never seen this error mode before. Was hoping Blacky would have seen this thread.
  24. Replies
    5
    Views
    224

    On my Z06, I have RPM by gear limiters for...

    On my Z06, I have RPM by gear limiters for throttle and I forget if it's global or by gear for the spark as well, so there are a number of ways to govern top speed but they're easy enough to find and...
  25. Oh it gets better. I rebooted the laptop and...

    Oh it gets better. I rebooted the laptop and nothing changed. Next I went into the device manager to attempt to update the drivers by manually selecting the location (C:\Program...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4