Search:

Im going to do some logs tomorrow morning. I will save them. I have all the Pics ready to go loaded. you want me to send you my calc pics file then correct? Also does anyone know a good EFI live A6...

Yes I'm using wideband serial. I took that file, dropped it in my folder from post #38. SO now i guess i will relog and send you that file back?

Calc Pids file attached

Filters working yes...now how can and where do
I find my calc pods file to send you

I fixed the error error with the filters

ok ill look into it. how do i post a cal.pids file , where do i find it

Sorry didn't get the greenshot
Yet here is my log, the error and what filters I'm using.

Ok will do tonight

ill get back to you later with the screenshot of the Map and with it in tune tool. thanks again

I tried to apply the filter to my logs it won't work says something along the lines of Pid selection. Also what is the VE Imtv closed table for? Do I edit that one as well.

Ok so i adjusted the filters. I re did a log this morning. Now should I take the BEN factors and
Apply it to the IMTV open table paste with labels and multiply? Then what should be the next step

here some screen shots

Ok well here is the Logs

Joecar, I will Post a Map With my BEN tables on it maybe you can view it along with my Tune and apply it and see what happens? :help:

I will post files later tonight when I get home, I will do another run as well. Im using V7 ScanTool not Scan & TuneV8. I set up my PIDS and Maps with BEN on Map A and Map B with AFR over MAF HZ....

alright update! i failed the MAF but left the yellow wire in the plug connected. I finally got my WB reading steady at idle. stays around 20 start up and drops down to about 13.8 14.9 idle warmed up....

I Also wanted to ask looking at the VVE table what do the Numbers represent?? I know a old fashioned VE table # meanings but confused with the VVE

Right now MAF and SD are enabled bc when I Failed the MAF (and disconnected the Yellow Wire on the MAF Harness) The car ran like crap and stuttered. I even Put NO MIL for MAF. Car surged so hard I...

Here is the Current Tune


20906

Here is a few logs from today maybe you can view em and take a look

208992090020901

Yes I set it to Innovative. Reads On Logworks 3 & Scan Tune and S&T. When driving it shifts to 12-14 but i dont know why at idle it hovers around 18-19-22. I have no air leaks. Also I turned DFCO off...

I know, Its just at idle it will fluctuate on my gauge too 22 to 14 back up. it only stays 22 or so after i reset the fuel trims. I went into EFI S&T and set the serial ports and set the Wideband to...

Ok she's up and running!! Wideband reading 23-24 AFR @ idle. Kinda lean if you ask me lol Im going to attach my 2 min Log. How do we calculate the newer values?20893

I just want to know how to hook up a wideband and how to adjust my VVE tables Open and Closed for N/A setup. I want to know and understand how to use the BEN factor and adjust tables or use an auto...

serial I think that's the better option I have it all setup. I have the Wideband gauge installed and reading already just want to connect it to Scantune and figure out how to use BEN