Search:

Type: Posts; User: joecar; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds; generated 8 minute(s) ago.

  1. Replies
    14
    Views
    379

    Ok, with RC1, FSV3 connect to Win7 without me...

    Ok, with RC1, FSV3 connect to Win7 without me needing to mess with the USB driver tool :cheers:
  2. Replies
    32
    Views
    1,338

    But first, let's make sure you can connect your...

    But first, let's make sure you can connect your FSV2 to your E38 and properly log.
  3. Replies
    32
    Views
    1,338

    Also, instead of GM.AFR use SAE.LAMBDA... this...

    Also, instead of GM.AFR use SAE.LAMBDA... this means your BEN calc pid will now be like this (if you're using serial comm from wideband):




    *CLC-00-110
    factor 0.5 1.5 ...
  4. Replies
    32
    Views
    1,338

    For E38, use GM.INJPWB1 and GM.INJPWB2 (noting...

    For E38, use GM.INJPWB1 and GM.INJPWB2 (noting that GM.IBPW1 and GM.IBPW2 are for LS1A and LS1B)...

    you will then need to modify your calc_pids.txt by inserting the following (at the right...
  5. Replies
    32
    Views
    1,338

    Did you find out why the fuses blew...? Are...

    Did you find out why the fuses blew...?

    Are you saying the spark plugs in the 3 dead cylinders were black...? This means the burn is way too rich. Were the plugs wet or just black with carbon or...
  6. Replies
    126
    Views
    78,942

    Sticky: Yes, correct... ( stated generally: multiply...

    Yes, correct...

    ( stated generally: multiply or divide IFR or stoichAFR by inverse scale factors )

    i.e as you have it, set B4001 to (IFR * X) and set B3672 to (stoichAFR / X) where X is 0.799....
  7. Replies
    155
    Views
    121,041

    Sticky: No worries, take your time. Use V7.5 to flash...

    No worries, take your time.

    Use V7.5 to flash and log for this (for now).
  8. Replies
    14
    Views
    379

    Ok, I'm going to try again...

    Ok, I'm going to try again...
  9. Replies
    14
    Views
    379

    This might be related: I can't get my FSV3 to...

    This might be related: I can't get my FSV3 to connect my Win7 PC, USB device is not seen.
  10. Replies
    32
    Views
    1,338

    Sorry to hear about your grinder accident, I hope...

    Sorry to hear about your grinder accident, I hope you're healing ok.


    +1 select just a few pids and see how it goes (SAE.LAMBDA, SAE.MAF, SAE.MAP, SAE.LONGFT1/2, SAE.RPM, SAE.IAT, SAE.ECT,...
  11. Thread: Ls1 pcm

    by joecar
    Replies
    4
    Views
    188

    To be used with DBW/ETC throttle, the PCM board...

    To be used with DBW/ETC throttle, the PCM board must have the transistor/IC drivers, otherwise it can only do cable throttle.
  12. Replies
    155
    Views
    121,041

    Sticky: Post your tune file and some logs showing this.

    Post your tune file and some logs showing this.
  13. A function for comparing float's is a very good...

    A function for comparing float's is a very good idea :cheers:

    ( 0.1 * 10 != 1.0 )
  14. Thread: Searching

    by joecar
    Replies
    1
    Views
    79

    lol, reminds me of absolute addressing in PDP-11...

    lol, reminds me of absolute addressing in PDP-11 assembly language :rockon:

    :cheers:
  15. Thread: Selecting Cells

    by joecar
    Replies
    2
    Views
    184

    Multiple select regions is very handy, thanks...

    Multiple select regions is very handy, thanks :cheers: What is the max number of regions...?
  16. Replies
    126
    Views
    78,942

    Sticky: Use EQR units to view the AFR table (i.e. the PE...

    Use EQR units to view the AFR table (i.e. the PE table).
  17. Replies
    32
    Views
    1,338

    You may have to Validate Pids. Also, instead...

    You may have to Validate Pids.

    Also, instead of E38.AFRATIO_DMA, try SAE.LAMBDA, and if it works use this.
  18. Replies
    4
    Views
    271

    Which PCM/ECM (I take it it is LS1B)...? Are...

    Which PCM/ECM (I take it it is LS1B)...?

    Are you obtaining the wideband lambda/EQR/AFR signal from analog voltage or from serial comms...?

    Take a look in the calc_pid.txt file under "1. Setup...
  19. Replies
    10
    Views
    3,375

    +1 no problem.

    +1 no problem.
  20. I'm reading thru this thread (sorry I'm running...

    I'm reading thru this thread (sorry I'm running behind due to work).
  21. Replies
    28
    Views
    26,930

    Sticky: I'm slowly reading thru your posts... please bear...

    I'm slowly reading thru your posts... please bear with me.
  22. Replies
    8
    Views
    2,688

    Hi John Done, This forum is for EFILive users....

    Hi John Done,

    This forum is for EFILive users. Please tell me your vehicle's engine RPO, and I'll let you stay...
  23. Replies
    28
    Views
    26,930

    Sticky: If you change the shift points, you don't need to...

    If you change the shift points, you don't need to do the adaptive relearn.

    Be careful in adjusting the shift pressures (!!!)... leave them alone.
  24. Please post some logs.

    Please post some logs.
  25. Post the ECM file also.

    Post the ECM file also.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4