Search:

If D9420 is the problem, I have checked VE, Maloo, CTSV, and Camaro , and the are all set to 0 for 5th and 6th at 3000.
The Camaro ZL1 is set to 575 for 5th and 0 for 6th
Not able to test at the...

I set B5145 to 1 at only 80%
and B5114 to only pull timing greater than .50 G/CYL

Using 6000 on a 6.8L LS3 S/C and cam with 102mm with good results (proportional and integral standard)
I also lowered B1651 and B1652

I logged GM.AIRPERSEC, and it logs past the 655.35 limit

Sorry, SAE.MAF

PID: Air flow rate from Mass Air Flow sensor (Grams/s) maxes out at 655.35 . I have increased the value of UNM-16-11 (gps), but it made no difference to the logged maximum of 655.35
6.8L...

Only have 12656930

All the UTE man files I have are :
2010 OS=12635863 flex fuel = no
2011 OS=12639270 flex fuel = yes (L77)
2012 OS=12647991 flex fuel = yes (same as the one you posted)

We needed the screen shots of your original file

Apologies, found that 12653249 is 2010

2011 OS = 12639270
CAL = 12639269

OS 12653674 = 2013
Cal 12653784

What is the 10th digit of your VIN, as well the 12th

I have L77 2011, 2012 and 2013

Thanks for the info

Could not get to the dealer, but was able to get a calibration with the same OS. Full flashed and the D0605 was cleared and the transmission works.
Was not able to change the VIN with Efilive. Date...

Have exactly the same problem with a brand new 6L90.
The date is Jan 0,0. Read the file and it appears to have all the tables, so it looks like it needs to be first programmed via TIS for it to...

Looking for 6L90E T43 OS 24264923 stock tune
Can anyone help out

"Setting D9602 to ENABLED, disables SPORT SHIFT mode when trans lever is moved to the SPORT position. If you then go into manual mode, it is locked in this mode, even if trans lever is moved back to...

"List the calculated PID names (omit the "CALC" prefix) to be pre-selected when black box generated log files are opened in the V7 scan tool software"
This is not possible for CALC."BEN_LC11_E38",...

"List the calculated PID names (omit the "CALC" prefix) to be pre-selected when black box generated log files are opened in the V7 scan tool software"
This is not possible for CALC."BEN_LC11_E38",...

Setting D9602 to ENABLED, disables SPORT SHIFT mode when trans lever is moved to the SPORT position. If you then go into manual mode, it is locked in this mode, even if trans lever is moved back to...

If you are running a T42, then I don't think a 384 will work
I have never seen a VE with a T42

"Your OS is a 2007 VE Commodore - possibly for middle east Chevy use (same car - A4 trans - if Speartech supplied it for an A4). ECM for that is 12597121. GM never used 12612384 ECM for 12612381 OS....

A seriously dumb moment.
I had a value of 1 across the board for B5145, instead of only the cell for 80% Ethanol !!!
Everything working fine.
Apologies

Started from scratch with the standard OS, did the upgrade and the timing is always being subtracted whether the switch is on or off (E85 shows as 85% with switch activated, and 0% when off)
This...

Both build 308 and 309 have date of 29th May 2014

22624402.calz
ver 7.59
date 29th May, 2014

I will do some testing tomorrow with different versions and let you know.
I tuned the car before RC2 and the switch worked, pulling timing when...