Ok, so there is no work around since the PCM is no longer supported?
Type: Posts; User: vortecyota; Keyword(s):
Ok, so there is no work around since the PCM is no longer supported?
I have just completed a conversion using a 1999 2.2 from an S10 - OS 09383061 and discovered that setting trouble codes to " Not Reported" doesn't cause them to not set. Is there a work around for...
I finally have this issue resolved. A very helpful member here has spent a lot of time helping me via PM. Thanks you very much!!!
We tried to solve this problem in the tune but ultimately had to...
I am working on an engine conversion in a 1983 Ferrari Mondial. The donor engine is an LZE 3.5L flex fuel from a 2009 Impala (e38 ECM) with a Porsche standard transaxle. The 4T65E and TCM from the...
V2 upgrade ordered.
Thanks Taz! Now I need to decide if the V1-V2 upgrade will benefit the hobbyist like myself or if I should just have someone else flash this one and only do conversions utilizing Gen 3 controllers in...
I'm finishing up a conversion using a 2009 Impala 3.5 L and a standalone E38 ECM but cannot establish communication with my V1. The E38 is the only controller on the Bus and I have installed a 120...
I installed the PCM out of my personal truck (already licensed) in this 72 truck and got everything working well. I believe it was a combo of H0101, H0102, and H0104 that got my VSS calculation in...
Actually it was {H0105} EFILive limits are 0-131070. I went from 4000 to 1000. Thank you GMPX! That would be a great help and I will be very appreciative! Is there any other info you would like from...
Really!?!? Why do we have access to parameters that if changed will brick a controller? Are there other parameters like this? Can all the other speedo parameters be changed? Does anyone even have a...
I'm not sure if this is relevant or not but when the first PCM failed I had just changed the vehicle speed sensor pulses per mile from 4000 to 1000; my attempt at compensating for a mechanical,...
I'm finishing a gen111 5.3/ 60E swap and I've lost two PCMs during reflash. The first was during a cal only flash, second was during full reflash (replacement PCM). In both instances all appeared...
I want my 4L80E to hold manual 1 and 2 as long as the shifter is in those ranges regardless of engine RPM or VSS. I have set D0913, D0918, and D0919 to 255 MPH. I also set D0914 to 0 MPH. I did a...
Thanks, makes perfect sense. My truck did not get tuned Saturday. Hauled it out there got everything set up and strapped down, then the Dyno jet computer would not power up. I left it there, maybe...
I have a new question. When tuning WOT A4 shift points, is there a way to set it up to shift by engine RPM only? Can I set D0910, D0915, and D0920 to unreasonable values and force the PCM to use only...
No EFILive:bad:. I'll post it when its done. Thanks for keeping an eye out for me!
Got an appointment at the dyno shop Saturday morning. I pray he can find some power in it! I'll let you guys know it turns out.
Exactly, Mine has to be done soon because there is a ride I have been wanting to go on Aug. 7. It will be a few months before my boss' truck will be running again. So I guess I'll just pay to have...
I think so too. It won't be long and my boss' truck will be running again and I will have the opportunity to tune it. Since its a street truck I'll be able to take it from the beginning and become...
I hate sounding like such a half-ass, but WOT is my #1 concern. I will need a fairly stable idle and will occasionally use PT, but more or less the truck is for pure abuse, so a toggle switch...
Here is the file I have been using since last year when I completed the powertrain swap. Do you guys have any suggestions on what to ask a local tuner to try and decide who can and will build me the...
I can do SOME street driving, but very little. Other than that I have a 50ft. dirt hill that I can and do raise hell up, spinning tires. Thats about all I can do.
Will post it up tomorrow. It was a tune that a friend of a friend did on an LS1/ Radix car. In other words it wasn't for my truck at all. The thing runs pretty good, but it just feels like a dog. I...
No, it contained a 4L60E segment, but I decided to go ahead and flash it in anyways just to see how the engine would run. If it seemed like a good start I was going to try a little harder to find a...
Not sure what make/model its from. I found it on Holdencrazy.com. It says 5.3 Radix, which is what I have plus an LS6 cam. The tune I have now is from a local tuner and I don't know much about it,...