Search:

Type: Posts; User: TBMSport; Keyword(s):

Page 1 of 8 1 2 3 4

Search: Search took 0.01 seconds.

  1. Ross, It's resolved. The issue was that I had...

    Ross,

    It's resolved. The issue was that I had too many files each with too many windows open. Switching back and forth through the windows and tabs caused some hang ups of the updates to show even...
  2. Just to clarify, the Calibration and Transmission...

    Just to clarify, the Calibration and Transmission Diagnostic parameter DO actually change in the OS Full Reflash, but it will NOT reflect that change on the main reading window (i.e. I will have to...
  3. T43 Calibration Full Flash Does Not Update?

    Hey guys. So I'm attempting to reflash a T43 (programmed by GM July 2018) with a different CTZ file that has the same OS, but a different Calibration (older) number. A CALIBRATION ONLY or FULL FLASH...
  4. Replies
    22
    Views
    6,941

    Got it. I recognize the technical aspects of "the...

    Got it. I recognize the technical aspects of "the process" are not generally shared due to it completely confusing the casual hot rodder -turned- tuner, but having done so many 6 speed swaps and...
  5. Replies
    22
    Views
    6,941

    So if I'm understanding this correctly, it's...

    So if I'm understanding this correctly, it's conceivable that, in strictly using EFILIVE, I could have programmed one OS over another without a problem, but can't necessarily put it back due to the...
  6. Replies
    22
    Views
    6,941

    :rockon::rockon::rockon::cheers::cheers::cheers:...

    :rockon::rockon::rockon::cheers::cheers::cheers:
    THANK YOU! You have confirmed something that I have suspected over the past few years. I personally have specifically focused on 07-08's T43's...
  7. Replies
    22
    Views
    6,941

    Ok.either way, I still cannot full flash the T43...

    Ok.either way, I still cannot full flash the T43 even with V8 as it tells me the OS is incompatible.
  8. Replies
    22
    Views
    6,941

    Additionally, I now am unable to Full Flash a...

    Additionally, I now am unable to Full Flash a T43. I wish to put the original 24239353 that was previously changed by a shop to 24249179, however I can no longer do it since everything has gone to...
  9. Replies
    22
    Views
    6,941

    Bump for an answer. Thanks.

    Bump for an answer. Thanks.
  10. Replies
    22
    Views
    6,941

    Sorry, real life got in the way. The OS's are:...

    Sorry, real life got in the way.

    The OS's are:
    12618164
    12611938
  11. Replies
    22
    Views
    6,941

    Yes, sir, with EFILive. It's been a while since I...

    Yes, sir, with EFILive. It's been a while since I last had to do it and it was before I recently upgraded the firmware and boot, but yes I've done it multiple times including my personal trucks. So...
  12. Replies
    22
    Views
    6,941

    I understand that, but I have overwritten this...

    I understand that, but I have overwritten this OS' s before. Is this due to the fact that it's not a .tun file?
  13. Replies
    22
    Views
    6,941

    Controller was/is setup for E67. I'm attempting...

    Controller was/is setup for E67. I'm attempting to full program the same type of E67 ECM. The ECM has an 2007 tune in it I'm trying to overwrite it with a 2008. I did only copy over the file into...
  14. Replies
    22
    Views
    6,941

    OS Fault Aborted FULL PROGRAMMING Failure.

    I loaded my AutoCal saved ctz file into my autocal, unplugged it, and then attempted to do a full program directly from the AutoCal, I got that message "OS FAULT ABORTED". What am I doing wrong? ...
  15. Replies
    26
    Views
    13,808

    Ok...mine started acting up again and giving me...

    Ok...mine started acting up again and giving me the same error when I attempt to plug into my E67's (in vehicle or benchtop). However there is no issue when plugging into my LS1 PCM in my '99...
  16. Thanks for the quick response, Ross. Good to know...

    Thanks for the quick response, Ross. Good to know for the future. Problem is, the TCM was sent to me as a "blank" disposable TCM, so I didn't bother to pull the actual original calibration file from...
  17. T43 Autocal V2 Licensing Issue and knowledge confirmation.

    Ok...customer sent me their TCM T43 to be programmed. I used an AutoCal to do so and sent him the TCM back with the AutoCal. It was a few months since the order was fulfilled. He decided to go a...
  18. Replies
    26
    Views
    13,808

    Gotcha. Thanks...let me figure out how to save...

    Gotcha. Thanks...let me figure out how to save this and make a ticket.
  19. Replies
    26
    Views
    13,808

    Hey Paul, I can communicate via V8 and was...

    Hey Paul,

    I can communicate via V8 and was able to pull up the licensing info. However, whenever I hit the CTRL+OK all I get is a yellow light flash (on the 2nd from the right light). No screen...
  20. Replies
    26
    Views
    13,808

    I was trying to benchtop program a T43 module and...

    I was trying to benchtop program a T43 module and discovered that the power cord I had was a 1.25 Amp, rather than 2.5A so I now suspect that the power draw on it and possible disconnect or power...
  21. Replies
    26
    Views
    13,808

    Paul. Thanks, but I tried in vehicle and on bench...

    Paul. Thanks, but I tried in vehicle and on bench ECM. Using CTRL +OK did nothing (holding CTRL, then hitting OK nor pressing both together 2,3,4,5 times). It just stays on main screen. I used two...
  22. Replies
    26
    Views
    13,808

    Soooooo...I now have this problem. If the cables...

    Soooooo...I now have this problem. If the cables are ok, the boot/firmware reinstall don't work...is my V2 fried?
  23. Replies
    9
    Views
    3,174

    Who makes yours Taz?

    Who makes yours Taz?
  24. Replies
    9
    Views
    3,174

    Thank you. I just contacted EFIConnections and I...

    Thank you. I just contacted EFIConnections and I think the problem is I am using one of their older 1.25A power suppliers with the harness and they upgraded to a 2.5A due to the T43's (and presumed...
  25. Replies
    9
    Views
    3,174

    I ended up putting the T43 in a pan of trans...

    I ended up putting the T43 in a pan of trans fluid, thinking that the constant clicking could be it searching for pressure. Now I get a single 1st click, high pitch whine, then a second click...but...
Results 1 to 25 of 191
Page 1 of 8 1 2 3 4