Hey all
the cax stuff is simply not my forte.
Anyone willing to dig up a few tables?
more than happy to pay for the service
PM if interested
Type: Posts; User: AGRO; Keyword(s):
Hey all
the cax stuff is simply not my forte.
Anyone willing to dig up a few tables?
more than happy to pay for the service
PM if interested
See attached
what pids should be logged to decipher these tables?
has anyone succeeded ?
Any movement on this?
Is it possible to use the existing tx/rx for direct connection?
Awesome! Thanks for that
So I found this thread https://forum.efilive.com/showthread.php?7726-PLX-SM-AFR-Serial-upgrade
But the pictures are not hosted anymore.
does anyone have a how to on this?
cheers
so far yes, sd is in full swing.
Found the issue, set C0311 to 20 v
problem solved!
I had a shot at this, the ve table dialled in nicely on cruise and idle, however there was no boost at all once full throttle was applied. The pcm obviously went into a limp/fault mode, I just...
Has anyone had success with a speed density tune on a 2016 Z06 LT4? E92 pcm.
Ross, the e38 is still being used, we have plenty of 2016 built cars rolling through the door, they're all equipped with e38 ecu's........ They're still in production. It's funny how Gm keep updating...
Thanks for the response.
business is business, we need to keep it rolling, but here is the situation,
to keep my business ticking over all business's need products that can do the job, so we can...
Hi all,
this is not a post to start a war or a hp vs efi.
Ive been running efi since it was released, I have a few streams.
This has allowed us to produce serious results, but the last few years...
Awesome, thanks.
thanks for that!
Hi all,
im after a 2011 camaro e38 tune file (a6), standard of course.
The holden crazy site is down, anyone have one ?
So by the sound of it, it's either E85 or 98 fuel?
Exactly right.
Perhaps a calibration from another car may work?
Do you know any E67 that had flex fuel enabled?
Correct.
Any other ideas?
Yes, everything is configured. The flex sensor is reading perfectly with ign on. But car won't start. I have done this exact same procedure on e38's, never an issue.
Its not a sensor or wiring fault.
i enabled b0178 on a stock standard car, same issue won't start.
Hi all,
I enabled B0178, and the mil to suite, wired in the flex sensor, car wont start!
when I disable B0178 starts and runs perfect.
The car in question is a 2015 HSV GTS LSA OS:12656942.
I did modify the torque tables, with or without modification it still retards.