Search:

[QUOTE=Spuco;115563]I got around to loging the pids for the DSP5, and everthing is working. When turning form left to right (clockwise) it go's DSP-off through DSP #4. DSP-off has a voltage of 4.3...

i remember that also. i read it in the scan tool manual

I could not get the frp to work either.

OK I'M WONDERING IF THIS IS GOING TO WORK FOR THE ABOVE QUESTION.... I LOADED A COPY OF MY STOCK TUNE AND THEN LOADED A COPY OF THE DSP5 FILE. I RAN A SCRIPT AND SAVED AS A PRACTICE ONLY FILE. I THEN...

Also i have seen a tutorial on video how to run scripts and was wondering if there are any others i could learn some of the tuning procedures from. Something i could watch or read.

Thanks brian

Yeah i have copies of the stock tune and copies of the dsp5 file. The actual base tune in the dsp format is the stock tune but has the timing cleaned up and a couple other changes. And then of course...

I was wondering how hard it would be for me to take the dsp5 format file and convert it back to 5 single tunes? I would like to do this so that i can compare 2 of them and use them as sort of a...

Sorry for the short explanation i have to to work in 15 minutes. While data logging you will be able to switch between tunes and it will show depending on how you have it set up. On the base tune i...

You need to data log e35dsp5v dma and e35dsp5 dma. What engine are you working with?

same thing here. Everything but the engine!

Changes in this update:

1. Added PIDs TRQ_FACT_M and TRQLIMACT_M to LBZ/LMM black box logging.
2. Fixed problem that caused the read and reflash windows to be jammed into the top left...

thank you very much that should make things much easier

brian

http://download.efilive.com/Software/V7.5/EFILiveV7.5.6.104_Setup.exe
http://download.efilive.com/Software/V8/EFILiveV8.1.2.84_Setup.exe

these are the newest ones i think

Mine is doing it again too. Keeps going to 5.7l and 0.000 on the weight.

Well i stewed on this at work for 12 hours i came home and typed up the above question. Of course now that have typed it up it took about 30 minutes to figure out that somehow it lost my vin and...

I was wondering if anyone could let me know how all my pid's became invalid?
I had a selection of 13 pid's i had data logged with several times successfully. Now when i go in the pid folder and...

I got it figured out. For one the dsp5 switch was not properly grounded and on top of that i was in the wrong place in the scan tool. The tuner that I bought my stuff from walked me through it in 5...

oops this may be in the wrong section. it may belong in the http://forum.efilive.com/forumdisplay.php?f=69

last week I installed my dsp5 switch and full flashed the dsp file. I'm am really new to EFI LIVE and just wanted to start by correctly hooking everything up to BBL. I started by following the step...

Wow reading these threads leads me to believe I might be over my head with EFI for a while! :confused:

Michael, I have a question, I already have a dsp 5 switch in but I like the locking feature on yours. My question is would I be able to get the pins back out of the ecm plug in order to install a new...

I went back in and made sure all the wires were in all the way and put it back together and he codes were gone and I have boost. So now I will go on and check the voltages and go from there.

So...

Hello my name is Brian and I am brand new to EFI LIVE.

I have an 07 classic lbz, and recently bought the efi v2. I received a dsp5 tune file from a reputable tune builder. I full flashed the file...

Great because I was wondering the same thing.

Yes, I live in Vancouver Wa. Did you take the tuning 101? How was it and where and if you dont mind how much was it??
Thanks in advanced
Brian