Much appreciated. Just to verify, where does this need to be added within the .CAX file?
Type: Posts; User: TorqueMonster007; Keyword(s):
Much appreciated. Just to verify, where does this need to be added within the .CAX file?
E38 ECM from 2007 RCSB 5.3/60e. OS# 12614088
What table is this by chance?
I had also wondered if you could keep everything as is and either scale (1.135 over the 63.4229 hard limit for 72lb/hr) in B1213 or B1214 and dial in VVE accordingly...
I am wanting to be double sure on associated adjustments for an E38 ECM in a 2007 RCSB truck with a max IFR of 63.4922 (in V8). It will be running only on a 7# spring on the gate with no other...
Will look into that. This is a factory LS1B pcm with original OS but FAST LSXr intake.
04 GTO with 408. FAST LSXr intake, factory LS1 MAP with correct scaling for associated MAP. Scanner says MAP is stuck on 10kPa regardless of KOEO or running (it will actually crank and run halfway...
I guess you could not report the transfer case diagnostics portion mainly.
Should this file work with the truck/VIN listed above? Also, truck is 2wd.
I have a 2009 GMC Sierra with the old OS# 12626014 that EFI LIVE is not supporting apparently per support. With that being said, Support said they are only supporting the OS# 12630501. Does anyone...
It seems as though once talking with support and looking over TIS a little more, the updated and supported OS is #12630501. Would anyone have a stock file with this OS in a 2wd crew cab with 5.3 or...
In need of a stock E38 ECM tune for the following OS for a truck with 6.0/6.2 with 6l80E.
OS# 12626014
Operating System 12626014
System 12626765
Fuel System ...
If someone could take a look at this just to double check as it's been a while since I've had to setup an LS1B for a TH350. Keep in mind that this is a base file and has not been logged yet nor...
Both the E41 ECM for the L5P and the E90 ECM for the 2019+ gas trucks that require "Unlock" of the security boot block to flash. I am very familiar with other ECM/TCMs but in the newest beta it...
In the latest update (which may still be beta) V8.3.35 it has a section where you can import TIS files for T87A TCM and E41 and E90 ECMs. From there it is supposed to take the data from the uploaded...
Thank you. I was able to sneak in the back door on TIS and find it. The original searchable link no longer works apparently.
I need to get the OS and all associated hardware for a 2015/2016 LML since TIS seems to be either hidden or no longer since the LML trucks are flash only. This truck has a trash tune and just...
I have seen several post but no clear answers. Will Efi Live try to support flashing or reading/flashing unlocked ECMs? There is atleast one company claiming to have the unlock strategy and password...
After a little more investigation all the pins were all different heights when unplugged from TCM. All of the pins didn't look to be seated all the way. Going to try and make sure they are all...
There was a U1000 or U1001 code present that was current for Class 2 Data Link but wasn’t sure if that’s because original motor was pulled and replaced?
2004.5 LLY. Truck came to me with a LLY swapped motor as original motor was locked up. In V8 OBD2 it will recognize the ECM and all associated information. Can flash ECM via V7.5 and all is good,...
I am thinking electrical. No issues any time other than after the initial flash however I am thinking coincidence at this point on timing. Vehicle and radio are 100% stock.
Never had any issues with identical vehicles before.
2015 Tahoe LTZ with push to start. Not sure if I noticed it before but read out with latest version of V8. Saved. Turned of AFM and deactivation solenoids only. Licensed and reflashed. Obviously the...
South Carolina. I think I have some insight on direction but not 100% sure till it's tried.
**I'll post this here with potentially different results**
L83 5.3, E92 ECM in truck. Cam is a GenV BTR Stage 3 truck cam. Kit came with 4* phaser limiter. All necessary components to go along...