Search:

I am trying to purchase a license for customer in front of me. Bought a few before using this system and the same cc. I keep getting a payment process code "Error: The transaction was not approved...

Okay guys. I figured out my issue. I hadn't used my cc for a while and used a couple times that same week and they put a stop on the card for security purposes. They called me shortly after I posted...

i tried all afternoon yesterday and all morning so far and it is giving me error codes.

I have made some changes to the tow haul shift point only and have had terrible luck. I also have tried to make the tcm lock in 2nd during regular driving for mileage testing and also had terrible...

Ross sorry to bring this back up, I was having issues so i needed to return stock, but because I had already done the lbz air box change and only modded the table in efi, I needed to do the gm update...

any messages or what exactly is happening that is telling you you cant do it?

well this is old, but it would be good to get a fix for this. i always have to put it in neutral to lessen the noise level at drive ups and such.

there is a new table in the latest download that basically tells the ecm to ignore the tcm request unless x,y,z parameters are met that you set up. it would be very nice to have them working. this...

how do you do it? i have 3-4 logs i have run with the v2 standalone and want to view them in the scan tool. i read else where here to copy and paste, but it seems odd to have to do that.

this is a new set of tables in the lly stuff, what do they do? it seems as if it gives some flexibility with the defuel stuff when the tcm requests it, but it changes it in the ecm. i like it and...

you wont see any info on clearing the data on an ecm for some time. logic tells me that until the lmm is done getting updates from gm, and the first models are done with the 100000 mile warranty you...

the ecm torque limited injection quantity tables are only for defuel when the tcm request it. if you never touch the tcm and do lots of logging and run your logs against the tune tables, with the...

not sure what you mean by getting it right in the trans. having it rebuilt with a performance setup or by tuning. if by tuning than that is not right. very few people go in and touch the trans...

torque reduction come from the trans, yes it is adjusted in the ecm but the requests are made from the tcm. if you limit it or turn it off that you do it in the trans. before the tables became...

if you tune to defuel more than you can make them shorter. if not the more power the more of a chance you'll have a tie up. heva you driven one with the defuel turned off via the tcm tune. the 3-4...

what????:doh2:

yeah i figured it out. i had to go into the explorer and figure out which boot block was in there, then i matched it to the proper firmware from another thread. then repeated the procedure using the...

i was in the process of doing the bbl updates and had gotten pretty far. i just downloaded the v8 and was trying to update the boot block and it is now stuck in dead poll. 2 lights are flashing and...

i have done this and i tried to update the firmware through the firmware screen and it is telling me i have .05.xx and i have to upgrade through explorer?????????? wtf is explorer. and what have i...

i know on the 3-4 up shift the on coming and off going clutch packs are right near each other and they tend to tie up under higher hp combo's. i believe they must have saw this from the factory and...

no, i was scared after all the warnings. i will do that first then. thanks

i cant find the "V2.04.72". under program files it only has .70. what am i missing?

hey guys just for another with timing, i am having a low stop/brake apply, to brake off barely rolling stumble, it is tune related but i have been monitoring timing at idle and once warm always have...

nevermind guys it started working i played with it some more and it must have took.

i am still getting the set to demo mode when i open the tune tool. i have registered the v2 again and still nothing. what am i doing wrong? when hooked to the v2 via usb it works fine.