Finally got the brakes on:hihi:(I was sent the wrong pair twice):doh2:, should have a log within the next few days.
Type: Posts; User: LM7Tuner; Keyword(s):
Finally got the brakes on:hihi:(I was sent the wrong pair twice):doh2:, should have a log within the next few days.
Ok, changed that going to log more data pending new brakes.(Vehicle on jacks)
The purpose of the rear oxygen sensor is to monitor the oxygen content of the exhaust gases leaving the catalytic converter. This gives the emission system a way to monitor the operation and...
I know the gauges reset when you reprogram the PCM so maybe reprogram it back to stock, and see if they work. You could have messed some things up in your tune, you may want to post it.
Here are the logs.
Thanks Joe, I'll get the logs.
You logging a lot of PID's might want to bump it down to under 20.
I know stupid question right? You can always make improvements, and this is just a rough tune. Anyway if you see any improvements that can be made let me know, I'm still not liking how its...
IDK about that, but after I let my car sit for 2 weeks because I was working on it, it ran real rich when I started it up.
The wideband should be before the catalytic converter for an accurate reading.
Really? My truck has done this several times before, I assumed it was normal. When it does this I have to reflash the PCM until it doesn't do it?
Ok thanks.
GM.TP or SAE.TP
SAE.MAF or GM.MAF
What PID's should I select other than the basics for your dash(VSS, RPM, ECT, Spark, Fuel Trim, AFR, Knock Retard, IAT, Throttle, MAP, MAF, Fuel Trim, Injector Duty Cycle, Fuel Status,) for tuning...
Why would you want a F-body to run flex fuel they are for hauling ass not saving fuel.
You sure you want it to rev that high when it is cold? Maybe its just me, but I let my cars warm up a little while.
Thanks I think everything is good to go.
I guess I'll just mail it. Wonder how many stamps I should put on it?
Ok I selected EXT.AD1 and then CALC.AFR_PLX1 and now they are valid but for allocating to my AFR gauge which one should I choose?
http://img178.imageshack.us/img178/839/44784737.png
Is registering my Flashscan serial number good enough or should I send the warranty card as well?
One last thing, how do I setup my controller with my scanner? I know there is a pid for the PLX wideband, but it wont let me activate it. Does the vehicle have to be running for the wideband pid to...
Here are the pics of it installed in the glovebox, sorry no wiring pics I buttoned it all up before I took any.
http://img41.imageshack.us/img41/6073/dscf1013vw.jpg
I'll be sure to post up some pics tomorrow, I grounded it on a bolt right underneath the dash fuse box that attaches the dash to the metal frame. Then I ran the wires through the dash so its all in...
Yeah the HD's have 4L80E's usually. I'd data log with the trailer, if you want it to perform ideally with the trailer.