I have a customer that 5.3 swapped a v6 04 Silverado truck. He converted it a Cable throttle body setup and pinned the ECM. The 1mb Express Van is what we use that will run the IAC valve still. ...
Type: Posts; User: John02SS; Keyword(s):
I have a customer that 5.3 swapped a v6 04 Silverado truck. He converted it a Cable throttle body setup and pinned the ECM. The 1mb Express Van is what we use that will run the IAC valve still. ...
We ever get a solution to this?
Had 3 vehicles lately that would allow me to flash, but when I went to scan showed every pid invalid. Latest update installed. Anyone run into this before?
You ever figure the issue out?
Very Nice! Going to try it on my car and a customers car. Thanks!
Have a customer looking at a dry kit, 300 shot, and wanting to fuel it with the Nitrous pe adder in C0S5. How fast does it react in regards to fueling enabling it when the kit starts spraying? I've...
I have a 2006 Corvette 6 speed auto that I need a bone stock file for. I just need the ECM file, OS 12614682 if possible. I looked in the repository and didn't see a 06 listed. Thanks fellas!
...
Looking forward to seeing the results from this, as mine will stop updating and freeze the tuner completely. Same here, reboot and go again. It does this at least 1 time everytime I work on the...
Thanks man. Started raining here and is supposed to all weekend. I'll play with it Monday.
I'll try it today again and go over everything to make sure it is all accurate. I have 2 filters set, one or coolant temp and the tps varies 5%. What kinda of accuracy percentage are you guys using?
The scan tool is recording, fine is 10, course is 50, frequency update is 10, and the cal link txt file is correct.
How does the fine control and course control work? Also, what should those two...
It is connected, updating in real time selected, course control, scanner running, and it shows the cell logging. The RR is the correct firmware version, 12.14r and shows to be working just doesn't...
Ross,
Good deal! What table would have already disabled it though, as mine is in V8 mode now. Not that it is bad, as the 6.0 trucks surge when switching, just want to know what table affected...
I played with the tune some on a 6.0 Vortec Max truck with the 4L70E tranny. I didn't see any tables/parameters to disable the AFM, but it is now disabled and stays in V8 mode. Where is the AFM...
Thanks fellas!
Beer,
Business is rocking man! We stay wrapped up, and I wish you was closer as I'd love to tune it for you again. I'm running a Nitro dave switch panel if that helps. I wish...
I've installed OS5 already and I'm looking to wire in the N20 switch. I have a switch that activates the nitrous kit on the car and would like to wire into it so that when I arm the kit the N20...
Not sure if your trying to be a dick or not, but I've got it covered. True expert guidance..........LMAO!
Thanks for the info! On the Map, at what point (kpa) do you set for WOT fueling? Do you run it rich in the lower ECT's or 14.62 ish everywhere except WOT?
Right now I've got the car in OLSD setting the entire OLFA table to 14.62 and the PE to 13.1 for WOT. I've seen it done with the OLFA table done 80-100 in your WOT value and the rest done in 14.62...
I can't get it to communicate. It tells me is isn't a valid pid. It is hooked up correctly. Anything needed on the commander to make it readable for the EFI live box? Something I need to...
I had it backwards, it was late. lol Other than that is the setup correct?
Finishing up the install and have a few question on the analog output to the EFI Live box. The very brief instructions has one diagram showing the white/yellow wire be the positive and the...