Search:

Type: Posts; User: Kennedy Diesel; Keyword(s):

Page 1 of 15 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    301

    Just to clarify this is 2011+ or 2015+? I have...

    Just to clarify this is 2011+ or 2015+?

    I have quite a few new E86A units here. I've programmed and sold a few over the years, but I don't recall if I ever used EFI to start. Pretty sure I used...
  2. Replies
    6
    Views
    301

    Thanks Ross, Would a calibration only flash...

    Thanks Ross,

    Would a calibration only flash cover the VATS or would it need a full flash? I may have only done a cal flash with the prior one. This latest one I already cautioned about the...
  3. Replies
    12
    Views
    2,364

    I've got guys out there running around at 28k+...

    I've got guys out there running around at 28k+ with stock trans and no issues. I'm probably a bit more conservative with my tuning, but I like to keep things together and not wreck stuff...
  4. Replies
    6
    Views
    301

    2015 lml/lgh vats

    Been doing programming for vehicle and ECM swaps etc for years on 2001-2014 models. Disable the VATS and go. A while back I had a guy doing a 2015 ECM for a rebuilder that he was working on. The...
  5. Replies
    2
    Views
    1,595

    Thanks Ross It's an odd one but that is the...

    Thanks Ross

    It's an odd one but that is the current TIS listing. I sent the replacement module to the customer with the more mainstream file loaded and will see how it goes. I had him try to read...
  6. Replies
    2
    Views
    1,595

    A50 stock base file-2012

    I have done quite a few Allison A50 replacement TCM's over the years, but I've come across what is to me an oddball in the 2012 model year.

    Typically they all seem to use OS 24266880 and Trans...
  7. Finally getting somewhere. DTCs: P3401 p3425 ...

    Finally getting somewhere. DTCs: P3401 p3425 p3441 p3449

    Initial suggestion made to him to locate the likely unplugged connector and plug it in. Probably will run just fine unless parts...
  8. 2007 Silverado 5.3 idle and AFM issues

    I received an SOS call from a guy with the following issue:


    07 Silverado 5.3 gas souped up/cammed and custom tuned by unknown with unknown equipment by previous owner

    Motor blew

    09 5.3...
  9. Replies
    5
    Views
    3,331

    I get HTTP 404 not found for the links to the...

    I get HTTP 404 not found for the links to the software.

    http://download.efilive.com/Software/V7.5/EFILiveV7.5.7.309_RC3.exe
  10. Replies
    2
    Views
    1,698

    Will do

    Will do
  11. Replies
    2
    Views
    1,698

    GM 5.3 in a Jeep?

    I had an long time friend reach out to me regarding a project one of his boys is working on. He wants to put a 2000 model 5.3 in a Jeep with a manual trans. I told him that I would check around to...
  12. Replies
    22
    Views
    5,995

    Works for me. I've had some decent results with...

    Works for me. I've had some decent results with the LMM so far.
  13. Replies
    17
    Views
    6,192

    The Allison main psi is analog. Just a valve and...

    The Allison main psi is analog. Just a valve and spring...
  14. Replies
    3
    Views
    2,792

    Thanks Ross! Too many machines to keep up with,...

    Thanks Ross! Too many machines to keep up with, it looks like my dyno PC was a bit outdated. All is well, and setting to 1 did get it enabled.
  15. Replies
    3
    Views
    2,792

    DSP2 enable

    OS # 02600601

    In the DSP2 enable I have a numerical value option only. Default value is 0.0. Do I set this to 1 using programmer logic, or is my version of this OS hosed?
  16. Replies
    18
    Views
    5,293

    Don't forget their engine went poof!

    Don't forget their engine went poof!
  17. Replies
    13
    Views
    5,759

    Most are operator error. There's only one known...

    Most are operator error. There's only one known bug and that one bit me as well as Mr. Tripp. Mine were easily recoverable.

    ECM Full flash (under normal circumstrances) only needs to be done...
  18. Replies
    13
    Views
    5,897

    Just wanted to point out that in this case,...

    Just wanted to point out that in this case, disabled means "not commanded" or disabled in the program and not externally disabled.
  19. Replies
    15
    Views
    6,232

    Divide "hg by 2 for psi. Something I've been...

    Divide "hg by 2 for psi. Something I've been hoping Ross would set up for us is the ability to switch the Imperial measure between hg and psi as well as lb/min vs g/sec.


    As for the turbo...
  20. Replies
    4
    Views
    3,653

    Fuel delivery rate.

    Fuel delivery rate.
  21. Replies
    15
    Views
    6,232

    Try 52.2"hg...

    Try 52.2"hg...
  22. Replies
    15
    Views
    6,232

    If that gasser is a 2wd extended cab I might know...

    If that gasser is a 2wd extended cab I might know someone interested...
  23. Replies
    15
    Views
    6,232

    I think you'll torch the tips of the wheel based...

    I think you'll torch the tips of the wheel based on McRat's experience...
  24. Replies
    15
    Views
    6,232

    Add a lot of fuel and hang on, but myself, I'd...

    Add a lot of fuel and hang on, but myself, I'd shy away from it or have a spare turbo on hand...
  25. Replies
    17
    Views
    9,816

    One of the best things that you can do is to get...

    One of the best things that you can do is to get away from the 2001 OS and run the 2002 ECM OS as there are just some odd things with the 2001 programming.
Results 1 to 25 of 361
Page 1 of 15 1 2 3 4