The timing out from what I understand, is only if you input the wrong IMMO number; I can't even get to that screen.
Thanks for the reply, I still have the car here but from what I understand I can...
Type: Posts; User: ssvolvo; Keyword(s):
The timing out from what I understand, is only if you input the wrong IMMO number; I can't even get to that screen.
Thanks for the reply, I still have the car here but from what I understand I can...
Have this fine 2005 GTO with a bad PCM. Looks like they are NLA so I had a used one, programmed it properly off the SPS site but I have tried for 3 days to relink the ECM to the PIM with no luck....
I watched my local Chev dealer reflash an E40 for me years ago with a bench harness and jump pack (booster pack) for a power supply. On the bench about 1/2 way through the flash it got very warm to...
I wanted to add a bit of input here as I have been trying to fix a tune on a 2010 Camaro LS3 with long tubes and fairly open exhaust. The thing crackles and pops very badly upon decel until the DFCO...
I want to thank EFILive and Socal Diesel for the great service.
Socal tried to repair my mess but in the end I needed a new V2. It was 10 years old anyway and the USB port was getting funky.
...
It's on the way to Socal Diesel for a looksee. Thanks for the reply.
Regards, Fred
Working on a LS1 for an old straw blower I am re-powering. I was cranking the starter motor and heard a loud crack and watched the V2 go up in smoke.
I opened her up and found it burned up a...
Many thanks folks I'll find an LQ4 manual trans operating system and most likely use that. That Microsquirt looks worth looking into for a Subaru powered woodsplitter though.
This is a budget deal...
OK here's a 6 liter LQ4 marine application, how do I get the calibration? Drawing a blank here wondering if I can pull it off the GM site and flash it in with a J2534 tool?
...
Hi,
Been awhile since I posted; feel free to move this post if it's in the wrong section.
This forum is such a great resource for help so here goes:
I have found a 2000 Camaro Ls1 from a NYS...
Nice!
Good question. I would think it would be blank as long as the ECM is flashed for a M6 calibration. I do have an 06 GTO I can check later.
John
Yes, purple on GM is usually cranking voltage. Pink is 12 volts with key on. Also if you want the cruise to work you will need a GTO cruise control interface module that converts cruise switch to CAN...
Please check C1 #51 circuit 275 green/blue wire needs 12 volts with the clutch in.
One can override this setting in G1213.
Hope this helps, I still LOVE my Volvo LS2 conversion, it burns...
Well most of those E46s here in the US had traction control and stability control. Since the network can't interface with your GM ECM you might be able to recode the other modules to either not see...
Excellent!
Is there a chance of building one box to do cruise, A/C turn on/off, tachometer signal output?
Maybe whatever else is needed to network E40, E38 system into older non networked...
Beautiful work. How are you dealing with the ABS light and VSC issues? Curious.
John
Thought you gents would get a kick out of this.
Read the comments also:)http://www.wcax.com/global/story.asp?s=13095355
John..........Have cheated the VE devil many times.
They must be using a Botch (Bosch) wide band!
Has anyone seen a tune from one of these 2011 pissy exhaust beasts yet?
Just curious as the new trucks should be hitting the lots now.
John
Max out BO704 and check BO701
That took the tires clean off my old Volvo with 12603159 operating system.
Good Luck....Nothing worse than a GTO that won't burn the tires!
:grin:Fee fixed
and WAY interested in the BMW stuff too Greg!
John
I'm sorry guys.
Advanced (WAY too advanced for me) GM tuning with Greg Banish. Held at Redline Motorsports in NY. state. over the weekend. Used mostly EFIlive which was a great help for me.
Thanks Howard for hosting and Greg B. for putting on a great class!
Well worth the fee for the class:rockon:.
Drooling over Big hp. 2010 Camaros didn't hurt either.
I just can't eat any...
Apparently dynos are not the hot ticket right now.
The salesman wants to drive 3 hours to show me their stuff.
I just mentioned that to my wife.
"Hey honey try to get a diamond salesamn to...