Search:

I don't know.
This sounds like what I am asking about. That is, I'm not aware this can be done, or where/how to do it.
I will need to go looking for it.
Thanks

I'm working on a 2000 Chevy S-10 that has a 411 PCM swapped in. The PCM is using a (2002 S-10) OS12212156. The stock 2002 does not have an EGR or a AC pressure sensor. I have never been able to...

On my 411 ECM, the GM.MFCSTAT is an high/low indicator. I don't see any mid range data, it is either low (0-6) or high (255). When it is low, the current MF count appears to be valid and counts...

I understand that failing to wait 15sec "sleep" period can mess things up. But in this case, I waited for the full 15sec timer to expire every time I flashed the cal and the OS+cal.

I originally...

Currently there are no DTCs.
I was chasing a random P300 (misfire). Which looks like cyl #1. (I don't think this is related to the no-start issue.)
The laptop was on battery power.

I took a...

The 12200411 (LS1B) PCM was working fine. I'm chasing some DTC's. I plugged the V2 into the ODB2 port then used the V2 keypad to Diagnostics->Trouble Codes->Clear DTCs. The V2 was also plugged...

I've run the stock tune. It performs pretty bad.

I think I'm looking for a "coolant temp vs Tq Reduction" table.
If it is there, I am not finding it.

To get rid of the TqMan, I've played w/:
B1902, D0301, D0801, D0802
None of these changes has helped get rid of the cold or hot stumble. The hot stumble is minor compared to the cold. I typically...

I have a 411 PCM running on a 2000 4.3L Auto Vortec. I've been tuning the fuel for a few months now, basically trying to learn what does what. I've spent most of my time tweaking the B0101, B5001...

The GM class2 serial bus is a 12v bus.
The test light would be dim when there is "talk" on the bus.
i.e. What you are describing is normal.

Power was the only thing I can think of that would cause a problem. I'll suggest that you had power on a gnd line. This would turn the V2 into a (burnt) fuse. I'll guess you are using the DLC...

Ask Ira what he replaced in your unit.

I don't have access to my manuals right now, but I'm pretty sure the serial line is a 5v line. If so, it will be less bright than the 12v line. Also the...

Thanks for the explanation. I thought it odd that there was no mention of GM pids on the log. But I was looking for a TXT file, not a PRN. The file is & was there. Apparently it just wasn't being...

My hardware is a V2. My software is V7.5 & V8. The V8 SW is not seeing any GM pids as well.
I sent Paul the log file.

Yes, I have validated the pids. (Many times, w/ & w/o logging.) Still no GM pids.
The VPL the I posted doesn't show any GM pids.
I don't know why.

W/ the latest update, I'm not seeing any GM pids.
Scan/Tune: 7.5.7 build 170
BootBlk: 2.7.2
Firmware: 2.7.14
OS=12212156

This was working prior to the update today.
Here are the details: ...

I think you are referring to the comment about some pids showing as invalid until the logging start, I'm not seeing that. w/ or w/o logging, I'm not seeing any GM pids.
I'll post in Blacky's...

Here is the *.vpl (valid pid list) that I ran a few min ago:
(Notice the lack of any GM pids. I ran it many times, and still no GM pids.)

EXT.AD1=Dynamic
EXT.AD2=Dynamic
EXT.AD3=Dynamic...

This is the PID list that I am opening inside of the scanner: (WmanShawn_CALC.VET.pid)

[Parameters]
CALC.LTFTBEN=1,4307
CALC.PE=1,4308
CALC.SELBEN=1,4315
CALC.VEN=1,4317
CALC.VET=1,4320...

Yes, it is an LS1B controller.
I mentioned the fact that there are no GM pids showing in the Default LS2 Metric lid list as well.
i.e. My scanner is not "seeing" any GM pids, regardless of the PID...

I replaced the calc_pids.txt file w/ an empty file. There was no change. (The X-out calc pids are not in the list. Still no GM pids.)
None of the PID lists have GM pids in them. i.e. Default LS2...

http://tinypic.com/r/9hq90w/7 http://tinypic.com/r/9hq90w/7
http://tinypic.com/r/ezn1vk/7 http://tinypic.com/r/ezn1vk/7

The calc_pids.txt file is basically WmanShawn's file w/ one change,...

I updated my V7.5, V8, bootblock, & V2 firmware.
I'm not able to see any GM pids, in the scanner pid list. I have the SAE, the CALC, and the EXT pids, but not one GM pid. (They were there B4 the...

My idea of using GM.ENGSIZE_DMA doesn't appear to work. It may be emumerated by GM, but it appears to be interpreted by EFIlive. This PID reports to "unknown". My 4.3L is not in the "size" list. ...

Thanks, I had changed the CALC to use the engine size in cc's. i.e. The log info used cc's.
I will switch it to Liters.

I'm finding that I have to enter the engine size info every time I create...