Search:

User Configuration\calc_pids.txt


Attached my calc_pids for you, easier then cutting and pasting.

just make sure mine don't stomp on any of yours.

Hey Guys
A LOOOOONG time ago I had enhanced the HP calc pid in this thread
http://forum.efilive.com/showthread.php?t=3&page=5
Calculating Instantaneous Net Power

I am on a local musclecar...

Heh, I was just planning on taking the tr 232/235 Trak cam and put it into my SS. Had all kinds of vacuum problems. Looks like this will fix it.

OOOOO
Going to have to save up and get the upgrade afterall :)

thx

Although really the only time I put her in cruise now is to goto the track and home again. She is living a life of luxury...

:) then I will do just that.

Besides just the SD part, what else does a custom OS get me?

Nope not a custom OS yet. Although I am considering it :)

Yep, the MAF was disconnected and disabled during the OP.
Its still disabled now in Closed loop per the instructions.

I wasn't planning on putting the MAF back to enabled. I haven't had the...

Thanks for the sanity check. Been away for a while and finally working on getting the tune down.
I was just following the autove tutorial pdf.

Ok, went through with a SD tune following the autove manual (again).

Sat outside lastnight for 30 minutes or more just working on idle and its perfect now ( no surges, no stalling, rpms steady...

What is the outcome of setting the 1st, 2nd ->3 shift speed at the speed I want 2nd to 3rd to shift at.

Does this mean I can just drop it into first and take off and it will automatically shift...

Its an A4 an not really that bad, just wondering why its pulling. If thats expected with the stock stall then no problem I will upgrade that later.
The idle is just fine at 750-800 and not really...

Ok, I can not think of where to look why my car is pulling away at a stop. Just letting up off the brake and its just up and running.

Idle is at 800.

I know its an agressive cam, and I have...

I did the bidirectional to get the spark and afr for idle. Worked really well too :D
Used autove to get the idle after finding the spark and its running great now. Took it out 2 times and its...

Just checking, I put in a TR Trak CAM ( 232/235 .647 .599 112lsa ) and just put the LC-1 on. I started with the autove doing the +15% and it was spitting gas. not joking either.

I went through...

what supercharger?

Ok I went through and did the Open Loop, and Closed Loop. Now confirming the LTFT but I am using one sides SB bung hole ( ha bung hole ( shut up beavis ), sorry could not resist the potty humor ;) )...

Don't want this lost in the other post.

Just add to the calc_pids.txt

400 or whatever you think your max hp should be.
3554 is the vehicle weight ( replace with your value here )
185 -...

Hunting down an old radar detector cigarette lighter connection now :D

Or hit a walmart and pickup one on the way home. Great idea. :D

Yup and thats what it does.

step 5 in the autove tutorial says to have it enabled and set to 122c

5. Open calibration {B3313} "DFCO Temp Enable" Set it to 122 °C

my settings in the tune:
LABELS Selection
Parameters...

When logging coming home today I am seeing during decel or coasting the aft going to 19+ and BE map for 3200x30map is at 1.6.

I changed the filter to remove the decels, anyone think of reasons...

That sounds pretty neat. Dont need to do any welding, both my cars have LTHeaders so I just use the passenger side front o2 for the wb sensor. Then put back the other when i am done.

I am...

After finally breaking down and getting an LC-1 WB02 from greenlightmotorsports I went through the whole setup of the maps and tunes. Not as hard as I thought it was going to be.

Pretty amazed...

Although if you use the SS tune your TA will be a better car now ;)

send it along I dont mind.