Pulled about 45% out of the ve table also changed b0146. Still working on cold start atm runs like a hairy Bill Goat when you start it for 20 seconds or so.
Type: Posts; User: mx_paul; Keyword(s):
Pulled about 45% out of the ve table also changed b0146. Still working on cold start atm runs like a hairy Bill Goat when you start it for 20 seconds or so.
Update all fixed.
Hi thanks for the reply , The valve train doesn`t make much noise , but I haven`t heard a stock engine for a while. I`m making a bit of head way . On p0101-3 i set to 1 trip and no mil , and now when...
Good Morning Gents/ladies I have put a big cam in my gen4 and I can`t get the idle to be leaner then 12 afr. I have tried allot of different things to no resolve. The log says the afr is commanded at...
Hi your better off using and modifying the tune that came off the original ecu. You will brick the ecu if it goes wrong copying a different tune on to it. hth
This is the new OS.
Hi its a simple yes or no setting ,I clicked on no. Cheers
Yes it was my biggest issue , good afrs now.
{B1219} Low Volatility Fuel Detect ) was the cause of the over fuelling at idle.
I had a bit of success today ,I did the mods that I was told to do . No p0106 code . Now I still have the problem of the commanded AFR being supper rich. It`s killing the Dog when he walks passed ,if...
I think their Ls1b tables?
Hi thank you for the reply , I`m hoping the Maff is failed ,I`m wanting to run SD .
Thanks Joe much appreciated the time you have given me , good luck with your Job hunting.
Thanks Joe ,
Hi everyone is this site dying a slow death ? I`m surprised by the little response I have received.
Hi yes it is a engine swap.
23203
Hello Everyone ,I`m a long time lurker (like 9 years ) I have learnt so much from you ppl on here and I`d like to thank you all. I`m having quite a bit of trouble with P0106 code , I have a Gen 4 E38...