Can you upsize rear tires on C7 and modify with EFI live to correct the ABS / traction control issues? Customer just stopped and asked to revisit the issue- Its been long enough I dont recall the...
Type: Posts; User: rubbersidedown; Keyword(s):
Can you upsize rear tires on C7 and modify with EFI live to correct the ABS / traction control issues? Customer just stopped and asked to revisit the issue- Its been long enough I dont recall the...
This is where I was ending up... So, in turn, is there a COS available for speed density/ 3 bar for that application? Thanks I am either out of luck or not finding what I need in the places I look!...
I think the problem is the PCM is an 03+ green/ blue connector, not a red/blue... the vans were 5.3L and and 6.0L cable throttle in that vintage im pretty sure (or so I thought) I dont believe the...
customer has a green/blue LS1 PCM... engine is a 24x 6.0L with cable throttle and T56 trans, now has a procharger with no maf and a 3 bar. I tried to find a stock van OS to start with, but it seems...
new car to customer, removed cats and did a read/ write, now wont start. Guessing CVN issue... customer is waiting of course from out of town
thanks in advance
1983519836
I'm sorry I looked and didnt see that... I looked multiple times. I dont believe the search function works on a PDF (on my computer anyway)
Thanks for your help-
i went thru the document link you sent and i still cannot seem to find it? My Cal ID is 61301234AE, cant find any "61" prefixes... I have done this a time or two previously, and I have another cab...
2008 5500 cummins 18962
1821218213
No start after modifying and flashing... $06FF error please help, on dyno and customer is picking up in AM.
thanks
ECM options? Dtc list? Are there any compatible files that have these options available to modify that are compatible with OS listed above?
trying to find a 2012 6.7l file with all the menus populated... it appears the file sharing site doesn't have all tables available on the 3 auto trans cals listed? (2500 and 3500 US and euro auto...
I would also like to get this info... thanks
Guessing Im out of luck, but we have a '09 Dodge that we have programmed previously with the V2, but an injector shorted and burned up the PCM. PCM was replaced and installed by dealer. Customer...
that is what I am saying... the datalog (the one attached) it will go into PE during the downshift, but if you make a solid 4th gear pull the commanded lambda stays at 1.0 irregardless. I did not...
cannot get to activate PE mode when WOT. Supercharged 415 CID w/ 6l90e. 2011 K3500.
Appears to activate upon downshift (accidental) on dyno but will not go in when commanding 4th gear and making...
I am not having much luck getting support for my file I need, so if anyone has a 2wd E78 file I can try please send it to me... This is for a '14 K3500 6.0L automatic. thanks in advance
Looking for help/ solutions... Have an E78 with the above cal ID... I have a supercharger sitting here for it although no support for the PCM (well, very limited) I would like to change it to an...
need support for this file and dont remember who/ where to send it???
thanks
We are converting an 11 to a 4l80, just wondering what can be done to tell the PCM it is a man trans (to keep the bus from getting confused looking for a tcm and neutral safety etc)
Do I write a...
Loaded autocal for customer, worked in shop. He tried to change tunes and has 281 error message...?
That is the cal id... Vehicle has left now, but there is definately some to be desired. I am not 100% happy but i feel my hands were tied at this point. I did get the extended crank issue improved...
2011 3500 HD 6.0L. We installed a magnusson supercharger and then installed a cam. I have gotten it better with the cranking fuel, but it needs some idle air help... It is E78 for sure.
cam and supercharger on a 3500 hd. experienceing extended crank and idle concerns, there does not appear to be ANY idle/ throttle control functions at this time except for desired idle speeds???????
now i cant get the files to load, I have the p12 format in the autocal, but when i load files into explorer and drag them into the bottom (they are saved as files for remote flashing) nothing appears...
Is there a tutorial on how to set these up or i am i just that retarded?