that worked, thank you so much
Type: Posts; User: TrendSetter; Keyword(s):
that worked, thank you so much
can you share the file for others to leverage?
i just bought credits to tune a 08 vette and now it looks like i need to use HPT because they have the ivt table for proper injector scaling.
its...
i have an e39 and a bunch of the tables have IJT and IVT as axis but i cant find those PIDs in the scanner? so it seems like i have no way to actually use any of those tables.
i updated to all the...
i made it using the calc_pids.txt, i dont recognize the interface in your screenshots. im assuming its v8.
the 23.49 in 017 is because my tune is scaled.
no promises that anything here is...
I tried a bunch of different pcm selections and it always said pcm not detected.
Im just going to 0411 swap it i guess. I have a couple licensed pcms sitting around so its going to be free vs...
Is there a way to read the camshaft retard on a 1997 vortec? i had to replace the distributor and need to set the timing.
Its just a stupid work truck and the guy i called locally wants $90 to do...
got it, Thanks jeff
hi,
could you apply the fix to my tune please?
thanks
21379
so the better response will be helpful, but since i have a ls1b that means there is nothing that i can do to go faster than 10hz with efilive, right?
I have a 512k ls1b and the older uego 30-4110 logging via serial. is there any value in upgrading to the x-series?
thanks
That was one of the tables that was changed to make it work, so it very well could have been my problem.
i used the tune posted and it worked.
thanks!
Ill try it as soon as i get off work today.
thank you!
20902
20903
20904
here is the tune file with a couple short logs
I am trying to spool my turbos while foot braking and it seems like the pcm is pulling timing on its own. i have the base spark in gear and high octane table set at about 30 degrees where it needs...
Florida/usa
i was able to test my stuff with my friends flashscan and his didnt work either. so it seems i have misjudged my wiring.
I have a flashscan v2 and have been using it for a while with a aem uego wideband and eventually my connector that had the tx cable broke and i never messed with it until today. when i fixed it and...
that fixed it, thank you!
yes that is the firmware that i currently have installed in my v2
I followed the steps in the first post, then went to my truck and tried to read the cal then write the cal and both processes...
I just updated everything to the latest pre-release (https://forum.efilive.com/showthread.php?25922-Sep-2015-EFILive-Public-Pre-Release) and tried reading the pcm and got the same 0333 error.
I updated to the latest firmware:
boot block 2.07.07 feb 7 2014
firmware 2.07.82 apr 10 2015
efilive is v8.2.2.276
the firmware update window says that everything is OK
and now i cant bbx...
Hi,
I have seen other threads where Taz mentions having the addresses for the 4l80e tcc lockup tables and was wondering if there is any plan to release a cax for these?
I am building my harness now...
I know this is an old thread but i dont really hang out here much, however i have specific experience doing this.
I have a 4.8/t56 turbo combo with cos5 and a msd 2 step. i connected the msd ground...
so the hardware is all the same for every 0411 and the OS just manages it differently?
is it the year/make/model of the original vehicle or does it get updated with the new OS? the way i have seen people determine which type of o2 sensor you need is by the original vehicle...