Hi Nver2loud,
Most of the time our problems are something small that we have missed. This is why it pays to read the tutorials over an over again.
I have been tempted to make...
Type: Posts; User: Laychut; Keyword(s):
Hi Nver2loud,
Most of the time our problems are something small that we have missed. This is why it pays to read the tutorials over an over again.
I have been tempted to make...
Hi Nver2loud,
You may want to recheck your Selben map. I am getting different numbers from your log than the screen dump you posted.
Also you need to validate/select...
Hi Test101,
You can adjust when each gear will shift up or down if selected manually. This should allow you to operate close to having a manual valve body.
You need to look...
Hey aaronr,
I just found this link that may be helpful for converting your voltage. It also provides the PID to log.
...
You need to know the range of your sensor. This will dictate what 5v equals.
I am by far NOT an expert on Calc PIDs. Below is a link to where I found the engine oil PID. Maybe these guys can give...
I have attached a Calc txt file that only has the engine oil PID in it. I thought the first one might be a bit confusing.
13102
Cheers
Hi aaronr,
There is a calc PID for converting voltage to PSI for engine oil pressure. I have attached my Calc PID txt with that calc in it. I would think that you could use the...
Hi,
Does anybody know how you could go about making curve charts using the data from scantool?
Say, if I wanted to have a curve charts showing engine torque versus RPM. how would i get the...
Hi Joecar,
What do you think about my theory for the flutter I mentioned in Post 29? Do you think it could possibly be that the RPMs could be too low for the selected gear that is...
Hi Joecar,
I have not added the data from the Calc Vet WOT log. I wanted to get some feedback on the log before I modified my current tune.
Cheers,
Laychut
Hi Dragon,
You can lodge a ticket by following the below link.
http://www.efilive.com/index.php?option=com_content&view=article&id=146&Itemid=145
or You can also send one...
What version Firmware and Bootlog do you have?
Hi Dragon,
You need to ensure you have the lates Bootlog and Firmware. If you have not already, go to the link below and download both the V8 and V7.5 software.
...
Hi,
I have completed a WOT log and also a log that captures the flutter with the extra PIDs we wanted to monitor.
WOT Log - 13024
I used the Calc Vet PIDs for this log. I had increased...
Hi Supershift67,
As I mentioned earlier I am still learning myself. Your VE table looks interesting.
I see you have modified the VE table. Was this with data from your...
Hi Joecar,
Should I keep using the Calc Vet PIDs or should I log some other PIDs when logging the flutter?
Hi Supershift67,
Below is a link to a tutorial on how to post an image.
http://forum.efilive.com/showthread.php?3064-Hosting-an-Image
Cheers,
Laychut
Hi Supershift67,
It is always helpful to post your tune. This way the experienced guys (not me) can give you specific feedback.
Cheers,
Laychut
[QUOTE=swingtan;168661]If you are referring to "stock" as "stock factory tune", then you can improve the engine response by optimising the the tune. Joecar is correct in stating the the maxiumum...
Hi Nver2loud,
I am not sure how much of a play you have had with Scantool V7.5, but if you need a bit of a walk through on how to select the PIDs in scan tool I have attached a link to a good...
Hi joecar,
I just wanted to clarify what you mean by WOT pull. Is that pushing your foot to the floor and waiting for the engine to catch up?
At the moment when I do this the...
Hi Joecar,
I figured as much.
I was thinking of changing either my diff ratios or my transfer box gears a bit later down the track. At this stage I am not looking at fitting a...
Hi Joecar,
Below are the screen shots of the Maps and the PID list I used.
13007 13008 13009 13010
Thanks,
Laychut
Hi,
I have a LS1 in my HJ60 landcruiser and I was wondering if it is possible to tune a stock LS1 engine to have higher torque at lower RPMs?
If I could get some of the torque I get at...
Hi Nver2loud,
I have attached the two documents I downloaded from the Tutorial section from this forum. These are what I went off for my directions for Calc Vet. You need to...