tHREAD WAS A BIG HELP. dOWNLOADED LATEST v7.5 aND v8. gOT THE $0194 ERROR WITH THE FIRMWARE UPDATE. fORMATTED THE sd CARD AND HAD TO REBOOT v2 AND cLOSE AND RESTART v* BUT ALL IS GOOD. fILES WERE...
Type: Posts; User: bink; Keyword(s):
tHREAD WAS A BIG HELP. dOWNLOADED LATEST v7.5 aND v8. gOT THE $0194 ERROR WITH THE FIRMWARE UPDATE. fORMATTED THE sd CARD AND HAD TO REBOOT v2 AND cLOSE AND RESTART v* BUT ALL IS GOOD. fILES WERE...
Yes, the Edelbrock was letting way to much airflow through!! I cleaned the rest up with using the MAFFEQ as you suggested. Thanks joecar!!
:cheers: joel
Follow up. :)
Hooked up the Corvette rear O2s - no help!! Trims were still +25 at idle. Trashed the Edelbrock 90mm TB and replaced with a new, stock 2000 Camaro TB. The new TB did it!!!! Trims...
Hmmm....I need to check this on the LS6 setup - old school analog gauges. :) Thanks!!! :cheers:
ummmm oops Corvette engine, Camaro PCM.
Thanks, joecar! I'll try the corvette rear sensors as they are supposedly less senstive due to greater heating.
:cheers:
joel
I looked at the attached scan https://forum.efilive.com/attachment.php?attachmentid=17490&d=1410785456 and the mVs stay in 30-50 range - when I pulled the booster and plugged it at the intake. So,...
Yes, I checked this. Actually, it's on the early part of the unplugged MAF scan. I think I'll recheck it and scan stfts and ltfts at the same time maybe I didnt wait long enough...can't hurt!! :) We...
Hey joecar - I added 25% fuel at the VE table, idle cells and it didn't change it a bit. I'll try the MAF.
Tb - no leaks. I even double checked it with an ultrasonic leak detector.
Thanks!!
Stock LS6 bolted to 4L60e. 90 mm Edelbrock throttle body (came with the wiring harness/PCM setup). New MAP and MAF. New Vette front O2s. Thoroughly checked for vacuum leaks - all corrected. :) At and...
I did an uninstall, fresh install 7.5.7 262. Read the pcm. Scanned and scanner says it's 2 different vehicles. Read PCM is a 2000 Corvette and scanned is a 2002 Camaro. I would guess this has to do...
Hey joecar! It's good to be back ........I need to knock some cobwebs from my brain. :)
FlashScan V2
V7.5.7 Build 262
Hi all!! It's been a long time since I've used EFILIVE. Many wonderful changes!! Getting back to a couple projects. :D
We bought this harness and PCM From PSI Conversion (PSIConversion.com). It...
I agree with Steve on this one. :D This thread needs to be stickied (stuck? :) ) in more than a single subforum. There is an amazing amount of info here - thanks, joecar!! You guys need to broaden...
Very sad.
Thoughts and prayers for him and his family. God Bless.
Can you organize a this info!
These injectors are used in the ASA tune. The GM tables are available in the ASA tun...offsets etc.
There are both a 1998 ASA and 2000 ASA/World Challenge Corvette tune in the tune file repository...
Actually, you can tune it a lot lower than that 1200 - I have. It will idle at 800 (stock). :D
here you go! :D
I have a tune for a 239/251 on a 106 at home - 2001 346cu, Z06. It's a pretty well developed tune (100s of iterations) :D I'll post it later today.
What a great thread! Thanks for all the great info, guys. :D
Mail sent. :D
I have two ASA tunes. One a 98 and another 2000. Give me your email if you still need them.
FJO dual. But, only single hooked up - waiting on new motor install for dual use.
EFILive - best customer service on the planet. :D
Bump^^^^.
Any ideas???
Cheers,
joel