Search:

Hello Rubber,

I found my usb to serial cable, I will check the settings in my lm1 and give you a call.

Mr. Prick, he has a lm1.

Brian

What codes did you get?

If you guys, go under c:--> Program files-->,efilive-->,calibrations-->,E40 is the 12595692.cal file listed?

Brian

Hello Bob,

It opened just fine for me and the tables I looked at looked just like my 12596660. What seems to be the problem? I have a stock 12596660 if you want to update with a full flash.
...

No problem,

Do you have a dyno sheet you could post? How is the part throttle?

Brian

Hello Bill,

After a quick look, does raising the Main Ve table at 4700 change the a/f if it does, I would keep going, if not check fuel pressure during the run.
One othe thing I see which I...

If you could post a tun and a log, that would help.

Hello Bill,

What boost are you seeing at 4700? What is your Grams/cyl? What software are you using? It's my understanding that Efilive is read only right now, on the E38 computer for the 06 C6's...

Derrick,
That is great, thanks for testing it. I got a project coming up that knowing this works, I won't run into this problem.

Brian

Scotty,

Could you list the fault codes you are seeing?

Joe,
Please re-read my post 10. The part in quotes came from something I found on another site. The picture I posted came from the scan log that Derrick posted and is from his car.

See the picture in my post 10.

Hello Derrick,

I found this on another site.


"Check dynamic airflow.

If you are over 2.32 g/cyl you will get a 1514 no matter what you do to the 1514 table.

Drop your IFR and VE...

Derrick,

Just to verify, that that maf is off the car or do you still have it on for the air temp sensor?

Brian

Sleepy,

The LQ9 debuted in 2002 in the Escalade and then in the SS Chevy in 2003 and then in the Denali in 2005. The LQ9 has never been put in a 3/4 ton pickup, plus all LQ9's have Electronic...

Hello Sleepy,

The LQ9 is a LS1 based motor with 2003+ 1024kb computer, I think you will find more info and help in the Gen III section.
What year is the truck? I could be wrong.
I got the...

I was in a hurry so I googled some tire calculators and first one I used came up with 382rev/km and so did the second. So I broke down and did it by hand and a calculator and I came up with...

Hello,

I did a tire size change on a LBZ last week. The rev/km that gm has was 424, I calculated the stock tires to be 411 rev/km and the new 285 size tire to be 382, but when I put the 382 in...

SlowHawk, where are you experiencing holes in the tune?

Hello,
Will 97 Corvettes be supported?
Or just 98's like Hptuners does?

Thanks,
Brian