Search:

I was unable to repair the defects found, Ive moved on to other solutions.

A few of us want to put LS7 coil on our GEN III cars, so we are building the dwell tables to match, if that is possible, perhaps they are already built and we cant find them.

It would be nice to...

this is the current link, I used it yesterday.

CD version 7.5.72 , splash screen says 2009
I noticed that the controller in the earlier version is called Gen III LS1 99-08, and is changed to LS1B, perhaps the error comes from naming.

we all...

reinstalled 7.5 from the old CD, and we are good to go.

thanks for your kind reply,
id rather jump off a cliff.

Ive done the connect and validate, along with vin number, I removed the .vpl file before validating and then verified a new one was created.
error during connection: ............firmware is not...

the update didn't work, any hints on how to manually add parameters? using XP Pro

that will work well AFTER the FACT

just updated the to 7.5.170 and lost all the GM. parameters.

any ideas on how this magic happened.

thanks for being gentle with me here.

there is more than just an oil change in this car:

the car is
2002 c5 A4 2.73, 1-2 6 pinion gear set
100mm MAF,
95mm throttle body,
LS7-441ci ...

1. what is CALC.VET ?

2. what is calc_pids.txt , I can download it so how do you access it?

3. this does not follow: Select the following CALC.VET pids and record a suitable log.
from the TAB...

there we go, I wasn't looking in the drop down menu labeled "system", to select "Externals"

thanks, I'm getting a reading now.

thanks for the reply.

that's what I would like to install "({EXT.AD1}*2.5)+10"

in C:\Program Files\EFILive\V7.5\Configuration, sae.generic.txt.

now the next problem
error reported...

I would like to modify an existing PID calc to read my autometer.

10 to 20 afr between 0 to 4 volts. ie (2.5 * v) +10

is that possible and how do you do it.

thanks'

Well then would the ZR1 injectors at 48#/hr be more correct?

LABELS Small Pulse Adjust (Milliseconds)
mS Value
0.000 0.000000
0.125 0.414063
0.250 0.359375
0.375 0.281250
0.500 0.218750...

Very good, I believe the siemen 60# short injectors are used in the LS7, so would that controller have the corresponding table for Gen III motors?

This is the B4005 table from the 2007 C6 Z06 7.0...

I guest it would be too much to expect that this table would be provided by the manufacturer.

these are great articles which provide absolutely no useful means of determining the proper values for...

fuel/injectors/small pulse adjust

this table is (Msec, Msec),

therefor how does this table respond to larger injectors for example 60 Lbs siemens.

do the values increase or decrease from...

seems to work now

I dropped the throttle scale B4349 which I had at .019 to .017 and
I dropped the flare control from stock setting -5 to -25.


the start up is now controlled and doesn't go...

thanks for the response,

I'm very new so please indulge my ignorance.

In LS1Edit there is a setting called Throttle Scale which I cant find in EFILive,

Also in one of the post on the forum...

I installed a 95mm throttle body on a c5 a4,
at cold start up the rpm goes to 2500 and comes back to 600.

I'd like like to reduce that start up rpm to 1500,
is there a table for that?

thanks...