I know this cable is an oldie, but here goes. I have a v1 that I used for my ls1 car, and my other car recently popped an engine light so I was trying to connect on the scan tool to see what's going...
Type: Posts; User: azzhauler; Keyword(s):
I know this cable is an oldie, but here goes. I have a v1 that I used for my ls1 car, and my other car recently popped an engine light so I was trying to connect on the scan tool to see what's going...
When validating PIDs, what determines which ones are available? I'm having an issue with an 12200411 pcm that I have swaped into my 98 Sierra using the calibration/os from a 01 Express van, as quite...
I've been messing with my tune a bit recently and stumbled upon table B5908 Fuel Mixture Spark Correction. I was just wondering why this table even exists? Seems to me it couldn't do a whole lot that...
Just been wondering if this sounds ok to anyone else. I have a PLX wideband on my 01 C5, the sensor is in one of the rear O2 spots, still stock exhaust. At idle and on the highway both if I have...
I have a similar question. I already set my high and low timing tables the same, and set my wot region to a flat value (14) and set my base spark in gear also (20). In my logs with the EST pids...
I'm just wondering if this is normal and I'm just looking too hard or if there might be an issue. I've been using the autove guide and have got to the end of adjusting, but I've noticed something...
I noticed a similar problem where if I selected 1 pid in the filter and used 'exclude' it worked fine, but with more than 2 pid it would not filter anything. Inverting the comparisions and selecting...
If this is just a firmware issue, it wouldn't affect me if I haven't updated any firmware correct? I have only extracted the files and run the scanner/tuner, and uploaded calibrations to the...
Well, I installed M$'s updates and rebooted and now it doesn't do it anymore. Sorry for the false alarm.
I was setting up a dashpage from scratch and was putting in a digital guage for KR. I resized the sections to give the value section most of the area, but it still stayed at 12pt font even with...
Man, you document things like a champ! Good werk.
GDI. I'm a retard. I was only setting the filter, not applying. Hooray for not reading the instructions.:doh2:
That is pretty damn cool. Nice work.
For this part are you supposed to force OL, or stay in CL?
Is that ok to use with my v1 cable?
I'm having a problem with filters that might be similar. When I have a log open and am looking at the "B" dashboard (the generic chart one) and press ctrl-alt-enter to open the filter dialog, select...
Meaning, if I got a blank pcm, could my commercial v1 cable that can do os and calibration uploading, make this pcm usable? I have found that the tunercats product can, but I'm not sure if moret han...
What are they? What're the criteria for determining which column the PCM uses? Is it related to http://forum.efilive.com/showthread.php?t=2643&highlight=performance+mode this post, as in can you wire...
Checked holdencrazy, but it looks like an 01 auto vette is the only stock file not there. :nixweiss: Just trying to make sure all the tranny values are stock as I haven't messed with an auto before....
So what did it do? :Eyecrazy: :D
Just wondering if that has crossed the development brainstorming table. I think there was a version of autotap that ran on PDAs? How cool would that be to scan with a PDA phone while you're driving...
What tables do I need to adjust to lessen the throttle closing on shifts? Everytime it shifts the throttle closes down to almost 60% then opens back up, most of the time not getting to 100% before...
Just another quick question: The 98 vettes still have the incompatible pcm also correct? They didn't get a one year jump or anything like the ls1?
Yeah, just found out on tech.
In that case, has anyone put a newer pcm in a 98?