Search:

Im having a weird fuel problem with a car that im working on .It is a 427 in a 99 camaro ls7 etp heads and ls2 injectors. we did a auto ve tune and it was fine but with the maf on in open loop the...

in the data log its still commanding 14.63.....when we did a pull on it stock the commaned A/F was what the PE table said it was...when we do a pull the A/F stays 14.1 to 14.3

Tried it...did not work...any other thoughts??......

the log file that is on my first post shows that its hitting 99.6 ( BTW all of the pulls that we are doing is on a dyno dynamics with a wide band)But i can try it anyway

We Have a 06 Chevy Truck 4+4 here with a procharger...and we can not get this damm thing to go in to PE Mode...Are we missing something or is else wrong here?


Bill
www.forcefedperformance.com

never mind

sorry my bad....my boss already was aware of that one...i was the dumb one that thought it was the trans giving us problems...The real problem is fuel...we cant get enough...the FP is...

This is a file for a 00 vette...its pulling timing for the trans torque but we have it all zeroed out....any thoughts????

Two Thumbs for you!!!!!!!!!! Thank you very much.
Also want to say thanks and two thumbs up for Jesse at wait4me.

EFILive has some of the BEST SOFTWARE SUPPORT I have ever seen in a company!

We Are tring to tune a 05 C6 with a SD tune ...the problem is i need GM.AFR_B to work with the Base Efficiency numerator 1 for the tech edge not of just the GM.AFR ....PLEASE HELP!


Bill

Just like it says...i did a search and looked for a Tutorial but had no luck..help anyone?


Bill

Any chance i can have you send me one as well? We have a car here and its being a pita!


Bill
www.forcefedperformance.com

forcefedperformanc@sbcglobal.net

I Need a stock file for a 06 Z06 #12605732 can Anyone Help?.. we have a car here thats being a pita and i think the guy that tried to tune this car before us really screwed things up but i have...

I Need a stock file for a 06 Z06 #12605732 can Anyone Help?

It was My understanding that D1007 - D1008 - D1009 Would Unlock the converter at 100% Tps. We were thinking If we can limit the Tps opening to say 95% even when the pedal is all the way down but keep...

Is there anyway to do this????? We Have a 02 With a VIG 5 Disk and Level 5 Trans from RPM.We Know it can hold the power but We can not keep it locked at the track.....


Can Anyone help short...

Sorry it took so one to reply...Its just really busy here. We had to pull off the dyno because of a belt problem but we got it back on today and so far its making 498 RW and 540 Tq on 6.2 PSI at 6000...

It Was the VE Table....FP was 58PSI through the entire run. This was our first Blown C-6 so we are still a little under the curve on the new stuff.

Thanks for all of your help!

Bill

Here Is the Tune and the data log with it....the car is on the dyno right now so if there is any thing else you want to see log just let me know.

Thanks for your help

Bill

My Mistake its a 05 but we are seeing 5 psi at that rpm and it just wants spike lean at that rpm

We are having a problem with a Procharged 06 C-6 going lean around 4700. We have 60 lb inj and a kenny bell boost a pump and no mater what we do it wants to lean out.We know the maf is not maxing out...

Did anything ever Come of this ???? We Have a 02 Vette with a 3800 Vig 5 disc And A Built Trans From Rpm and we are have problems keeping the converter locked going down the 1/4 Mile. Should we just...

Anyone?

Well the car ran really good for a couple of hours and then out the blue its started to do the same thing all over again.We brought the car back in the shop and tested the cam and crank sensors and...

Just wondred if anyone knows when the custom os will be ready for the 05 Corvette ...i have a customer with one and a new Procharger thats wants a mafless tune.


Thanks,Bill