Search:

Thanks....I think I see what happened. In B3605, "Commanded Fuel When in Open Loop", I set AFR to 12.95 at 70 KPA and above for a ECT of 40 and above. The idle vacuum is so low that it is reading...

All;

We are tuning a 04 GTO LS1 with a larger cam installed. I setup the Auto VE file and loaded into the car. I noticed that the idle is between 65 and 70 KPA...Seems high (low vacuum?), so we...

I was using ver 7.5.3 build 36 when I got the error. I thought this was the most updated version? If not, let me know....Thanks.

Paul,

Yes, it did save the "bad" file. I will be sure to send it out to you all tomorrow. Thanks for the support. I hope it can be fixed so we can tune the truck for our customer.

Regards,...

We tried to read a customers 2007 Colorado with a IL5 today and kept getting a error "Unknown Bin Format" or something like that. EFI Live would get to the point where it was about to read and kept...

Hello,

I tune many 85 to 95 camaos and vettes and wanted to try out V4 for scanning. I try and enter the Evaluation Key for the license and it does not seem to be working (Date is for Dec 31...

Hello all,

I am debugging a Code P0327 on a LS6 Lingenfelter motor. I am assuming that PID ESC1DNL is for the front KS and used with P0327....

Data logging shows very low counts on sensor 1...

I think this is an easy one.... What ECM is used for the 2002 Z06 Vette? Any issues tuning with FlashScan V2?

Thanks!

Paul,

Thanks for all the updates and all the hard work! I work with a lot of software packages and EFILive is one of the best applications I have seen! You need to write code for the dyon...

Thanks for the information. I just ordered Tuner CAT from JET Chip. I also ordered AutoTap to use as a scan tool.

EFILive is so much better! Not many LT1 OBDII requests now a days so I don't...

Can I use EFI Live to tune a 1997 OBDII LT1? If not, what software would you all recommend I use/get. Thanks.

You are correct...It is there. This is good news. I should be able to make the AutoVE work with the OBDI cars.

Is the expected release of this firmware some time this summer??? Thanks for...

When the ALDL OBDI scan option comes out for V2, will we be able to create BEN function to an make AutoVE correction table? I do a lot of TPI tuning and that would make the tune so much faster.
...

Hello,

What is the specification on the impedance level on the analog inputs? If I wanted to share a voltage from an existing sensor with the ECU and Flashscan V2, would I expect to see any...

Very helpful. Thanks!

Our shop tuned our first EFILive car this weekend. It was a 2002 Camaro SS. It had a mail order tune in it when it came in to the shop. After a baseline on the dyno, it was running 313 HP and pig...

I now have FlashScan V2 and related hardware. Can I purchase just the Autotap software and use my flash scan hardware to scan vehicles?

Thanks in advance for your help.

Nate

Hello all and happy holidays!

I just received my FlashScan V2 last week and I am reading the forms like crazy to help me get started.

When tuning a stock GEN III engine, what level of...

Thanks! I have been reading this form for the last few days now. I must say it is one of the most positive and supportive forms I have been on! I get my Flash Scan V2 this week! I can't wait to...

Thanks for the welcome and information Joe! :thankyou2:

Nate

Hello all,

If you are using MAF then how do the VE tables come into play? I understand if I disable the MAF, then to car uses the VE tables...but with MAF enabled, are they used and if so, when? ...