I'm trying to flash in a tune and vin is all 0's how do I change it so the PCM contains the proper vin again? I changed it in the "home screen" when you first open the tune and flashed it in, but...
Type: Posts; User: yzriders182; Keyword(s):
I'm trying to flash in a tune and vin is all 0's how do I change it so the PCM contains the proper vin again? I changed it in the "home screen" when you first open the tune and flashed it in, but...
I see now. Thanks!
15101
That's what I figured just didn't know if that was normal or not. Kind of figured its not.
For my 3-4 up shift 50% throttle and up is set to max. Does that seem right?
Got ya I'll work on that. Thanks
Ok got it changed over to lb/hr.
I did find the shift tables but I am not understanding what I should do with those tables. Just to update this is my current tune file 15091
Again thanks for...
Fixed it
They appear to be disabled to me already.
Changed
I can only change it to lb/min how can I change it to lb/hr?
It is a SD tune 2 bar the MAF has been removed and replaced with a IAT sensor.
Yes I would be willing to just curious to the reasoning of why. I set it to AFR because thats what my wideband reads...
15028 This is my current tune too.
Thanks for any help!!!
Ok I have all the proper injector data, cos3 installed and bugs worked out.
Im now trying to tune it and starting at idle. My wideband 02 is reading that at idle it is running lean (jumping...
So the saturn redline map sensor should work ok?
I got the MAP for a 06 saturn redline...
After what you just said I did some digging and it seems I need the Baro sensor?
I went with a 2 bar map on a COS tune and I am having problems calibrating the map.
Since its a 2 bar map C6301 Map Sensor Scaler should be set to 190 right?
Then C6302 Map Sensor Offset...
I see. How accurate of a pressure/vacuum source do i need? I have a vacuum/boost gauge in my truck but its just a cheap one.
I do have a vacuum pump would this work? what do you use?
...
What does C6302 control? Would that help with the map seeing boost while cranking?
Ok I made some head way today. I messed with the settings on the MAP and set C6301 to 98 and C6302 to 0. the map would read about 102 and would show vacuum when cranking. It started and ran well...
No it doesn't smell like its flooding out or anything.
You mean by checking plugs? I could pull plugs but other then that I don't know how I would tell.
I do have a wideband O2 sensor hooked up but I don't feel like it runs long enough for it to get...
Got ya. Wouldn't that make it add less fuel? Or does that add more?
What do you mean by inverting it?
I changed A0008 to this and still wouldn't stay running. Didn't have much time to chase the map issue so ill do more with that tomorrow.
14817
What should I try setting A0008 to? anything over 1 adds that % more fuel right? would 1.25 be to much to try for a start? Or should i follow the suggested values in the AutoVE tutorial?
Just went to take a screen shot of the gray cell and it is no longer gray... going to raise the whole table for C6101 to see it that fixes the issue and going to throw more fuel at A0008.
Also...
For P1514 would I raise the values for C6101?
I also have a gray cell in that table. What does that mean.
Sorry for all the newb questions.