Anyone? I got it to crank but no fuel.
I read the entire archived thread on this and no go.
Type: Posts; User: tytilidie; Keyword(s):
Anyone? I got it to crank but no fuel.
I read the entire archived thread on this and no go.
So, take the vehicle to GM and let them install it all?
Basically, I had what I thought to be an ignition switch issue. I replaced it and the NSBUS with no fix to my problem which was the truck dying in me while I am driving and wont start for several...
OK I pulled the stock tune from the stock PCM, but when I try to load it into the new PCM the OS doesn't match. How is that possible if the PCM is blank?
So can I pull the stock tune out of the stock PCM?
Good morning! I am looking for a stock tune for a 2007 TBSS. OS is for 12614654 this is an E67 PCM.
If no one has one, is it possible to pull the tune from the factory PCM with the Flashscan V3?...
Is There a Cheat Sheet on What Parameters to 5.3l PCM for a Swap??
I took care of the VATS but I am not sure what values to change for all of the Emissions stuff.
No Data Received. Where to start with this? I have Flashscan v3. I am trying to load a tune to my pcm which is from a 2001 5.3l Tahoe. And that is what I get. Is there a flow chart out there on how...
Hey guys, I am wondering if anyone in the Colorado Springs area could meet up with me and give me a crash course in Efilive. I am used to Holley Dominator and Tuner Pro. I am having trouble with...
OK, update here. Turns out, CHINA SUCKS!! I bought my harness from ebay and didn't realize it was a Chinese company. So as it sits, I tracked down and verified every wire to the PCM and ended up...
Upon further digging, I found that I can monitor data on my Tech 2 with my other PCM, not the one I flashed with EFilive. When I went to read the PCM I flashed, it said no data. I assume this means...
Do you have fuel pressure?
Yes
Check all the ground wires?
Yes
Can you open the Scan Tool and read DTCs?
I get nothing. Tried the Flashscan tool, an Autozone scanner and my Tech 2.
Can you...
Hello all, I have successfully flashed my PCM to remove VATS and still can't get this thing to start. The PCM is out of a 2001 Tahoe and I used an aftermarket harness. I have verified that all wiring...