Search:

Type: Posts; User: Naf; Keyword(s):

Page 1 of 7 1 2 3 4

Search: Search took 0.01 seconds.

  1. So i was told to rise the min spark, my gear...

    So i was told to rise the min spark, my gear shift issue was happening between 3000-4000rpm, i lowered the min spark and it seems to have cured my ghost issue where in between shifts the rpm climbs...
  2. Replies
    0
    Views
    514

    Stock WBo2 sensors on E67

    I know from the pids, there are a few ECMs out there that use 5v reference instead of 1v.

    Is there a way to duplicate this idea so that the stock ecm gets the readouts direct from the wb02 and not...
  3. Thread: E38 idle tuning

    by Naf
    Replies
    319
    Views
    142,255

    Sticky: Tune plz Also discribe your restarts a little...

    Tune plz

    Also discribe your restarts a little better, like it starts but struggles to get to revs or struggles to start but gets to revs once started.
  4. Replies
    2
    Views
    828

    DVT FAULT when trying to CASE RELEARN

    I am tryin to do a crank sensor relearn, and no matter which method i try i am failing.

    I tried EFILIVE and its giving me DVT FAULT,

    Parking brake engaged,
    Applied brake pressure
    engine at...
  5. I know i am diggin up an old thread, but i am...

    I know i am diggin up an old thread, but i am curious to know if i use a 2007+ column stock shifter, PN 15860125, with my stand alone harness, would i be able to use the TUTD and power option in my...
  6. Replies
    59
    Views
    29,500

    No one made one for them Cadillac lovers?

    No one made one for them Cadillac lovers?
  7. Replies
    135
    Views
    92,817

    Sticky: I have done the VATS removal with EFILive and...

    I have done the VATS removal with EFILive and HPTuners several times, and none of these devices unlocked my ECM, i am swappin out my transplanted harness for the original and will try and relink the...
  8. Replies
    135
    Views
    92,817

    Sticky: I swapped out all the older 24x and 1x components...

    I swapped out all the older 24x and 1x components for the 58x and 4x components. So i have everything including the sensors that match up with the newer system.

    I tried all combinations, and even...
  9. recommended PIDs for monitering injector flow rate

    I would like to log my injector flow rate, so it may be dialed in a little more for my current VE.

    Would you plz specify the Pids for a e67

    thank you
  10. Thread: Original Maps

    by Naf
    Replies
    1
    Views
    1,235

    Original Maps

    Where may i find unedited maps for scanning, i got a little over zealous and most of my maps are all messed up...
  11. Replies
    135
    Views
    92,817

    Sticky: Hi, my name is Naf, and i am a sufferer of VATS....

    Hi, my name is Naf, and i am a sufferer of VATS.

    My engine will crank, i have ignition, i have fuel pressure, but no Injector control.

    I have a factory car where i swapped the older PCM for the...
  12. Either normal or pattern B, i really dont know,...

    Either normal or pattern B, i really dont know, thats why they are the same...
  13. Would like another set of eyes on my calibrations

    I have a 2010 Tahoe, which i tow with, i massaged the trans tune a little, and she feels better, but i have a small problem between 2 and third shifts. Its gets up to the shift point, releases 2nd,...
  14. Replies
    11
    Views
    4,082

    This is an actual 2005 CTS-v where i swapped the...

    This is an actual 2005 CTS-v where i swapped the engine harness and module for a 2006.

    If i lose that much, i will try the colorado 09 OS
  15. Replies
    9
    Views
    4,130

    My OS is currently 12605669, the 2009 Colorado OS...

    My OS is currently 12605669, the 2009 Colorado OS is 12630465, lookin through the OS reference sheet on the forum, it doesnt look like i am able to upload the OS on my e67.

    I may try and find...
  16. Replies
    9
    Views
    4,130

    For a 2004-2005 CTS-V, it is possible to upgrade...

    For a 2004-2005 CTS-V, it is possible to upgrade the engine module from PCM to a e67 found in a 2006-2007. ONLY ISSUE REALLY is no cruise control. And you have to validate the ecm when you want to...
  17. Replies
    1
    Views
    835

    DVT or AutoVE Open loop

    I have to admit, i have been cheating while tuning my E38 ecm. I leave the car in normal operating parameters, and use the trim to adjust the VE and MAF.

    Yes it gets you close enough, but my fuel...
  18. Replies
    14
    Views
    3,385

    Here are my screen shots, i did it twice to show...

    Here are my screen shots, i did it twice to show there are also changes to my VVE after i save...
  19. Replies
    14
    Views
    3,385

    You know i have seen changes in my VVE as well. ...

    You know i have seen changes in my VVE as well.

    I will make my changes,
    click on Generate Coe...
    it will all hold steady, then when i click on the save/save as the table changes in the...
  20. I found arc marks near the positive terminal. I...

    I found arc marks near the positive terminal. I feel the battery charger could have slipped and arced before fallin on the carpet. I am using an alu bracket to hold the batt in place as well as the...
  21. Replies
    11
    Views
    4,082

    I went onto the EFI compatible list and my ecm is...

    I went onto the EFI compatible list and my ecm is not compatible with the 08 trailblazer, though it has the MAF scalin i am looking for.

    I currently have 12605669, and i had access to 12618164,...
  22. ecu was toast, swapped it out and i now have...

    ecu was toast, swapped it out and i now have communication with ECU
  23. Updated firmware and now V2 unable to find vehicle

    I upgraded my firmware to the newest version dated dec 11, 2015 and now i am unable to use my V2 to datalog alone or even with the laptop. Yesterday i was able to flash one tune, but today i am...
  24. Thread: Simulated o2

    by Naf
    Replies
    4
    Views
    1,425

    It was a poor ground issue, so i swapped the WBo2...

    It was a poor ground issue, so i swapped the WBo2 to be down stream and i installed NBo2 upstream. I then did not use the analog output from the innovate. I merely disabled the sensor 2 settings.
  25. Thread: Simulated o2

    by Naf
    Replies
    4
    Views
    1,425

    I know the numbers .909 is 11.50 0.055 is...

    I know the numbers

    .909 is 11.50
    0.055 is 17.40
    .450=14.7

    Htr and error are .450

    I had a e2 and my mv should have been .450 but instead was .460/.464/.507
Results 1 to 25 of 171
Page 1 of 7 1 2 3 4