Search:

i got a chance to try it out this morning and it worked great, it shifts right and showing the speed almost dead on. i really apreciate all of your help

ok ill that one a try tomorrow thanks taz

ok ive been working on it all day i have the speedometer in the truck within 2 mph of the actual speed and i had to put the h0104 to 1000 and now its shifting but it is showing a very low speed...

ok i talked to them and they said that it was defenitly 8k pulse generator

ill give them a call just to double check to make sure and i ended up using the tune with the z06 ve table.

ok i didnt get a chance to try it till late last night, it is still getting a slow signal whereas its only reading maybe 5 mph when the truck is going about 20 mph. it also runs whole lot better but...

the speedometer in the truck is 10 mph fast so when im doing 60 according to my speedo im actually doing 50 and the actual tire size is 38 inches tall and 40-14.50-17 is the size written on the...

ok ill start from the beginning and again i greatly appreciate all of your help. i bought an 02 4x4 with 4.8 that rolled over. i had a core 5.3 and rebuilt it, i raised the compression a little and...

this is the best ive gotten it the speed reading is close to actual speed and it shifts now but you have to back off the throttle for it to shift and any increase in in throttle will make it down...

it came with the truck and it uses a gear to run the cable

9290

Sorry about the lack of info i installed a 5.3 with a 4l60e and a 208 transfer case the sensor is from abbott enterprise and its connected to the speedometer gear on the output of the transfer case...

hello everyone im new to the tuning world and im getting my but kicked and any help would be much appreciated my first and main issue is i have an 84 chevy 4x4 with a pulse generator and cant figure...