Incorrect
If a stock tune has no restrictions for being linked to an autocal you can flash with a flashscan, any restrictions such as linked to remote device/autocal will prevent you from flashing...
Type: Posts; User: GMC-2002-Dmax; Keyword(s):
Incorrect
If a stock tune has no restrictions for being linked to an autocal you can flash with a flashscan, any restrictions such as linked to remote device/autocal will prevent you from flashing...
wrong fuel tank segment ?
You would need to create a .cax file for those parameters to be shown inside the editor.
The calz file is what EFI-Live has mapped, anything that is not mapped by them in the calz must be added...
Not to my knowledge
It will stay on that setting until you change it.
They do not BETA TEST Anymore, we did that 17 years ago and did that up until around 2013-2014
Have not seen a BETA Group in about 7-8 years
Yes,if using EFI LIVE
You can purchase them from my web store in my SIG Below
Can you send it to me as well ?
Thanks
You could try a EFI Connection Bench Harness with a PIGTAIL and then connect a TCM onto the ECM and see if that makes TIS Happy
I do not use TIS2WEB anymore, its such a PITA
It required a TECH2 or MDI or Mongoose Cable with a TIS Subscription, which I had at the time.
I would have to see if I can track down the actual procedure, as it has been many years since I did...
Start by going back to stock in your tune file and make one change @ a time, test your 4x4, when it stops working you found the change that is causing your 4lo to have no throttle
In my experience the VATS System wants to connect with the BCM to be happy, at least on all the models, if its a 15, 15.5 or 16 E86B then you need a dealer tool/procedure to enable the VATS System or...
check your cigarrette lighter fuses, if the OBD2 port has not power that may be the issue in the truck
if the bench harness 12v key on is not functional that will cause similar issues
In the most simple terms it is a user created file, the file will reference a value/values in the binary and the EFI-Live Software, if you configured the data correctly will display that value/values...
If the vehicle had any aftermarket radio's, remote starting systems, aftermarket alarms, etc, there i a very good chance the communication was interrupted during the flash process.
If this was the...
Full flash, those are 100% stock files
I uploaded the exact file you need.
This is the last updated file by GM released correct for that original OS.
Here is a clean file, exact match
I am not sure of how the process works as far as random key tries, but I have found that a range of 0 to 65535 can take sometimes almost 35k to over 40k attempts to find the key.
I have had some...
You can contact me, thanks
There are three other gear ratio values in the code, I have all the missing addresses mapped in my CAX.
If you send me the stock file I can alter the other three ratios for you, but only the...
A40 is a PITA.
GM ONLY TOOLS for a OS CHANGE, if you attempt an OS Change there is a high likelihood it will brick, the A40 TIS Lookup is an absolute nightmare, it requires the TCM Part Number and...
USE V7.5 "COPY WITH LABELS"
Then "PASTE WITH LABELS"
TheN "Transpose"
Thanks,
I had no idea.............:good: