Techedge 2J1 , at around $260 AU$ you can have a few of the units in the shop to use
Type: Posts; User: ntae; Keyword(s):
Techedge 2J1 , at around $260 AU$ you can have a few of the units in the shop to use
if i remember right after that it asked if the program was installed right i clicked all ok
updates coming through on my system
If you want i can send you my spare SM AFR for you to test your set up
if you want to send it to australia i can help you out
Have had the same problem with the E40 ECM with the key off for 10/15 minutes you can do a full flash and your back up and running
i would test both sets of wiring from the TB to the ECM to see if both are reading the same
i take it the TB is a stock unit , if not with setting up an aftermarket unit that uses your old guts...
with a ls1 i think you need a TAC ecm to run the throttle . i think the ls2 with a e40 or e38 ecm you dont need the TAC
i see in a post you have a TAC all ready
I think it works like the VE tables in the E38 ECM's you need your V2 pluged in before you open the tune file
Let us know what PLX unit you have and what EFILive cable are you pluging in to please
Geoff
Tech Edge 2J1
http://wbo2.com/2j/default.htm
There are a few people in mackay like minded . there is a week long fishing / tuning / drinking get toghter starting this sunday with interstate people to joint us again . i know Jez has a few days...
is the IDC you are seeing from a dyno or scan tool ?
what fuel pressure and fuel system are you running and what KW is it putting out
make sure fuel pressure in not droping off
My V2 works in Shane's car with the PLX serial setup ok .as soon as we load 8.1 22/6 the problems starts . the update you sent yesterday is showing problems as well , shane is sending the trace file...
Both people there V2 units work in passthrough ok . its just when you use BBL there is the problem . Both of these units had the same problem with the same techedge 2J1 unit a week ago and mine was...
We reloaded the Boot & firm in the V2 . Formated the V2 config , internal & Sd card and all is good now :cucumber:
http://wbo2.com/sw/logtech.htm
http://wbo2.com/sw/log.htm
i would use winlog and see if you have the same problem
gmh308 when do you think we will see it in our holden's
GTO Base
and i was thinking the Beta 17 was the serial number :doh2:
Jez i remember you sending me a MSN message from the back seat of the same car i was 1/2 way through a power run on the dyno
I have been trying to work out what pid to log for manual trans to work out the gears for a while with no success . i was thinking of making a map like we did with the older pcm's , i even got out my...
I asked a week ago and got not at this stage sorry , but if more people ask we may get one
All i can do at this stage is use serial wideband data out of the wideband built in to the dyno
We just need craig to make a E38 Roadrunner ECM