Also when I try to self clean the tcm it does not do anything? But it works on my g8... is the 07 a tricky tcm?
Type: Posts; User: nick123; Keyword(s):
Also when I try to self clean the tcm it does not do anything? But it works on my g8... is the 07 a tricky tcm?
So I replaced the maf and it seems to idle better and transition better from park to reverse. Also i set the idle a bit higher based on setting the idle to 64 and zeroing the idle correction tables...
Do you have a wideband o2?
How did this work out? Any troubles? When you go wot does the trans hunt or skip gears? Is it faster ? Lmk. Anything you don't like about the tune file?
Lmk if you need more help
The vin will be different I think you want to compare and then make a new tune file but leave your new tune file tire size the same...
Oh and the the trans file is for a 3.27 rear diff you have to change the tire size in bolth the ecm and tcm files to match
I did not look at your tune file
The os may be different
If it is copy and paste the vve and torque tables also b1099 well pretty much everything needs a change
Lmk if you have troubles...
having some troubles getting my escalade to transition smoothly from park to drive and reverse stationary foot on the brake it wants to idle down from 800rpm to about 500 rpm and dies...:bawl:
...
23538
23537
No the ones that come with the hi flow cats
Shorties 1 7/8 with 3inch collector
And a 3.27 Camaro rear diff
Do you put your B1651 and 1652 back to stock after tuning theB1829 table or...
do...
Kooks headers
3inch exhaust
Aem intake
Solo mufflers
Smaller harmonic balancer
So I'm just reading this thread more and I'm confused do you set 1651 and 1652 back to factory afterbuilding...
Kooks headers
3inch exhaust
Aem intake
Solo mufflers
Smaller harmonic balancer
So I'm just reading this thread more and I'm confused do you set 1651 and 1652 back to factory after building...
[QUOTE=nick123;252663]the closer I get to 550rpm using B1652 to reduce idle speed the rougher is seems to idle.
I zeroed 1845 and 1843
63 g/s in b1829
First start after idle trim reset ....runaway...
Yeah I'm planning on adding a cam shortly probably a rcr dragmaster. I understand maxing out min idle air B1829 will cause the ecm to disregard minimum idle limits essentially doing away with the...
How do you see so many frames in the log . I can only see like 100 frames when i log...how do you squish them?
What idle speed should I shoot for on a stock cam?
Reason I ask is the closer I get to...
Yes I just got my aftermarket exhaust installed finally and have been logging and tuning the vve and torque table..
can i help
i have a 2009 g8 gt
i have a innovate lc2 and bosh wideband
i ordered a null modem from efi live do i need this or use a different setup ??
what settings to modify for proper logging...
18477
hi my brothers truck pcm can be read and tuned but not scanned...
i have 2 other trucks that scan no problem
with the v2 attached to the odb 2 and the v2 connected to my laptop i enter the vin...
how do i reset the fuel trims using only the blue hand held??
i have gone through every option on the handheld and cannot find "reset fuel trims"
also when i read any pcm the handheld says...
17232
pids for maft
cant find pe mode pid for some reason??
found it calc.cl replaces it...
the maf corrected map on narrowband??? col row should be what exactly
ok so now... can i run calc maft with no wb??
when i run calc maft i use my calc vet corrected VE map??
aaaha now i get it 17210