Search:

Hi Kevin,

Does your truck's serial number end with a zero? We've had some issues with serial numbers ending with a space character that EFILive automatically converts into a zero. But that can...

That should be fixed with the latest beta-2 update released today.
Regards
Paul

If the controller's operating system against which you are verifying the DMA PID(s) is not defined for the DMA PID, then it will try to verify with the address $40000000 - and obviously fail and mark...

The problem is:

When a calibration definition is loaded the software figures out the hard min and hard max values based on the bit size, the factor, the offset and the inverse settings. That...

Not in this release. Working on it for the next major release of V8.


I'll take a look into both of those issues.
Regards
Paul

There are no DTCs stored in that log file. Even if there were, when you export logged dat to a *.csv file only the PID data is exported, not all the other meta data such as DTCs.
To view DTCs saved...

ATTENTION - BETA SOFTWARE RELEASE

We strongly recommend that you do not install the beta software over the top of your production systems. It is possible that ...

If/when power* is dropped from the OBDII connection, then the FlashScan device will reboot and the USB connection from the PC will be dropped. The EFILive software does not know that the USB...

When editing the chart properties, you need to left-click on the part of the chart that you want to change - then the appropriate edit boxes get enabled. You can see which part of the chart you are...

Tried emailing it but got this, I presume because it was a zipped exe file:

gave this error:
This message was blocked because its content presents a potential security issue.

I've posted it...

The latest software now uses the exact calibration file name (*.calz) that EFILive uses, just with a *.cax extension, although most will still be the same as the OS number.
You need to look at the...

Hi Josh,

Sorry if you didn't get a reply on this. I did test it and found the same problem you reported. It has been fixed in our internal build but it's not ready for release just yet.
If it is...

I'm sorry, I misread your original post to say "scripts" instead of "cax files". The setting I pointed out won't help with the cax files.

Can you give me an example of what is not displaying...

It may not be an EFILive specific issue. See this:
https://windowsreport.com/loadlibrary-failed-error-1114/

EFILive will request 3D hardware acceleration and associated dlls to be loaded if this...

Hi Greg,

It did eventually load into V7, it took about 30 minutes to load and it only loaded the first 100,000 (out of 600,000+) frames. That's because V7 is limited logs up to 100,000 frames....

You may need to set this setting:

Regards
Paul

22930

The plan is to raise that to 40 bits, or more likely 64. There's a bunch of PIDs (>40 bits) that need adding.
It is high priority.
Regards
Paul

Are you getting the 1400 error or the dll error"?
Reagrds
Paul

The V8 software doesn't use the V7.5 registry settings. So the V8 problem is most likely not related to deleting the V7 registry settings.
Try running the V8 installation again and it/should will...

I got the logs, thanks. Unfortunately I still can't reproduce it.

One thing to try is to close all V7 software, edit the Registry (run regedit) and completely remove the V7.5 registry key and all...

Could you please send me the log file (paul@efilive.com) and I'll try and figure out what the problem is. I have had this same issue reported before but it's proving very difficult to reproduce.
...

Thanks for the log it helped but not enough, what I really need is a set of two files:
1. The *.efi data log file where the WO2 data flat lines.
2. The matching *.htx trace file of that same...

Are you able to use pass-thru logging (from a PC or laptop) along with the V8 scan tool to log the wide band data?
If you can do that, then as soon as the the wide band data flat lines (well within...

Doh! I just saw that you posted the Windows version in your original post - sorry my bad reading skills.
Regards
Paul

Can you start V7 with logging enabled?
To do that, edit the icon on the desktop by right clicking it and selecting properties. Then add /l (space, forward slash, lowercase L) to the "Target" field,...