Search:

Did the whole unlock thing with the Bullydog and went to flash a 15 Dodge and keep getting the error $0531. I've read that it's a number mismatch thing between the tune and the ECM. The tune is...

#1 it will turn 5000 but not under load.
#2 not sure he does I'm not sure I do either, can you please explain?
#4 I noticed that he still had some post active, can you please comment on the results...

I want you guys to take a look at this tune and let me know what you think. This is for a full built 2.6 puller. I didn't write the tune but I am concerned about the timing. Not really the timing but...

Can you elaborate as to what is involved and the cost?

Thanks for helping a newbie trying to understand all this.

Is the reason they are a variant due to the fact the tables on the x/y axis have limited number of columns and rows so most of the time the actual readings are always somewhere in between these...

So if the commanded fuel rate is 100 mm3 and the rail pressure is 11000 the ecm will see the coresponding cell in the pulse width table and uses this number for the amount of time the injector...

So, is the actual pulse width determined by some sort of calculation within the ecm and merely raising the MAX values in the table gives a higher MAX target?

I came across a thread on another forum that got me to questioning myself on how I understood the pulse width tables actually functioned. Is the numbers in the table D0502 the actual time in...

Has anyone ever tried a Y configuration OBD cable? Any issues running the scan tool while still powering my edge cts is what I'm after.

Wow, I would have never thought of that. I set the DB up same as the other computer and wala, works great now. Thanks
for all the help guys...........

I am running the newest version on both computers and whats weird is on the data tab everything is correct but on the dashboard tab its just the generic stuff.

Thanks, I figured out that on one of the tabs A B or C I can create 3 smaller charts that will monitor 4 pids each on the same page.

Any idea why my desktop will not read the log once it is...

Another weird deal I ran into. I copied the log file from my laptop to a thumb drive then put the log onto a desktop computer. The log file will not read on my desktop but if I take the same file and...

Here you can see I only have 4 pids on one page and I have seen examples that have all 12 on one page. Tabs B and C also have 4 pids each recorded on them.


14208

14208

Did I not explain my issue well enough? C'mon guys 38 views and no answer.

I need a little help with the data logging. I have set up and ran some logs with the scan tool, must say I am really liking EFI live. I had set up 4 pids on each of the 3 screens and ran and saved...