Are you able to read the tunes you have pulled from vehicles? I was able to open that tune from the depot.
Type: Posts; User: RojoCamaro; Keyword(s):
Are you able to read the tunes you have pulled from vehicles? I was able to open that tune from the depot.
Just an update. I was able to play with the car today, which went well. I successfully updated to 12212156 and after about 3 20 minute logs everything is slowly falling into place. I also found some...
If the OS is corrupt and the tune I am working with came from the pcm already modified wouldn't that make my tunes OS corrupt? I also noticed that the OS is not a 01 camaro but a 01 silverado. Could...
Alright I got a stock VE table and added 15% per the autove tutorial. My wideband is an AEM uego but I don't believe its a wideband issue because I can feel the rich and lean conditions. Especially...
I thought I would avoid that by disabling lt and St fuel trims and also setting the rpm threshold to 400 instead of 4000. I appreciate all the feedback guys. I will be starting an olsd tune the next...
Is there any way to test it or just do a full flash? And if I do a full flash, would I copy my tables to a new file or just use what I have?
It looks like a stock sensor with aftermarket maf ends. It's a straight shot from slp lid to tb. Do you you agree with statesman? Would that parameter issue affect sd tuning? The car didn't have...
I use the filter setting from the calc.vet tutorials but I'm having a lot of inconsistency. The ben factor will want to pull or add a bunch of fuel then I'll flash the file and run another log and...
1928919290
As for the injectors I'm not sure of the exact source but I did find them online with the specs.
Coil Resistance: Approx.12 Ohms / High Impedance
Static Flow Rate: 28 lb/hr = 295...
Hello I've been trying to get my OLMAF tune straightened out. The first issue I am having is that my cold starts are terrible and lean. It bounces around 600 rpm with the wideband buried into lean....
Tried again today. The only issue I had was that RPM showed NA after the first restart. I killed the car and tried again and it started to log everything. Just to be clear, EQIVRATIO is the commanded...
8.2.2.290 v8 and 7.5.7 build 299
It was about a 1hr20 minute total log time. 10 minutes of actual driving each way. it was fine the first time, then after the break those pids stopped reporting...
So I attempted some black box logging after buying flashscan v2. Everything seemed okay and all data was logging. After I stopped the car and drove it again about an hour later it started to log but...