I will try that. But under boost i am well over that. I would think it shouldn't be an issue. What do you recommend for a setting? And thanks for taking the time to look.
Type: Posts; User: beaukz28; Keyword(s):
I will try that. But under boost i am well over that. I would think it shouldn't be an issue. What do you recommend for a setting? And thanks for taking the time to look.
Here is the current tune I am running. I know it needs a lot of work. I am running the MAF only tune that came with the supercharger. But I have alot more mods than it was meant for. First time out...
Ok. I went out for a drive today. As of now, I am running the tune that came with the supercharger. Which is just a MAF only tune meant for a stock application. I have added a smaller pulley and a...
Yea. I have read through it several times and played with it before the supercharger. I was more curious as to what to play with in the fuel pump controls and what results to expect. If anyone has...
Its been awhile since I have played with my efilive. Looks like the same for most as most of the posts on here are old. Doesn't seem like to many people are on this forum much anymore. Probably all...
I'm sure someone has asked this before and it's in here somewhere, but a guy could spend days reading through these posts until you find what you are looking for. I am working with a 10 Camaro ls3 m6...
I'll work on processing this and messin around over the weekend. Thanks for the info. I'm sure I'll be back on monday with more questions.
I'm looking for info on commanded a/f ratios. On an accel gen 7 there is a map where I can put in the exact a/f mix that I want the pcm to achieve. Is there a map like this that i'm not seeing? When...
As far as I know, GM has always primed the fuel system before cranking and after the vehicle is shut off. This is normal. I'm not sure what kind of car you have but if it has an egr valve make sure...
I can try to answer whatever you give me. Let me do a little more thinking on the fuel problem and get back to you. Thanks for clearing those things up. As for the pinging. I've seen several things...
Make sure that you clear trans adapts after trans work. Sometimes the ecm is trying to compensate for thens issues that do not exist anymore. I have overhauled and replaced many gm tranny's. Mostly...
I'm one of those dealership techs everyone seems to be unsure about. But I do a lot of driveability. Especially on camaros and vettes. Let me see if I can help. First, the facts. You replaced the...
Make sure you spray into the valley. Thats where they always leak. You have to force a piece of brake tubing under the intake through the foam insulator and then spray into the valley.
do i need to be online to register it?
Also, I want to read the stock PCM calibration so I can save it but that isn,t lit up in the drop down menu for me to select. It seems like I'm not...
Can someone help me so i can get started? I registered the software under the help tab (it doesn't say weather or not it needs an internet connection). Next I go to the register VIN with V2 under...
I'm new here and a beginner but I think I can help. I work at a Chevy dealer and have seen a lot of these trucks with misfires. A very common problem is bad intake gaskets causing a vaccum leak from...
I just got the v2 software and have a couple of questions on getting started. It came with 2 vin's. I cant even figure out how to get one entered. Do you have to be online to register the software?...