Perfect should be here Tuesday! Thanks guys. I am picking up a 2010 H3 (5.3) tomorrow and want to see what all is in the tune (Flexfuel stuff I have not seen before) and look at it when on the rig. ...
Type: Posts; User: Beer99C5; Keyword(s):
Perfect should be here Tuesday! Thanks guys. I am picking up a 2010 H3 (5.3) tomorrow and want to see what all is in the tune (Flexfuel stuff I have not seen before) and look at it when on the rig. ...
Can I order the cable for the V2? We got a dog from the pound, and day two she dragged out my track backpack (that had the V2 in it) and chewed the backpack, in doing so she busted up the port...
Yep, Thats pretty neat
I found that ok, and read the instructions before I posted, the question still stands, what does the PID tell you? Is it a AD input or is it more a relay status (on off)...
I am not familiar with two steps yet (other than making some panels with some)...
Seems like it would be nice to know when it was active (compare rev limiting/timing to programmed values w/...
I would like to try this Wednesday nite, looks like rain though. I noticed the current tune I have 2-3 degrees KR at low RPM going up hills, so I think SDemon is on to something with my low RPM...
Cam is Comp Cams 224/228 @ 114 .58x lift
I have to Download the tune, it was street tuned with the bad springs on it when I got my driveline done (RPM level 5 A-4 Yank 3000 and ZO6 rear).
What...
Spray was set for 2800 Dry
Stupid Question could the KR be actually the TC kicking in? Seems the KR would be a function of RPM / load, and it looks like it is tapered off at a steady rate...As...
What can this KR be....??? Beginning of run hits 9.9 and then trails off???
12.9 leaving soft (first run having recently changed out Valve Springs---had 4 broken outter and 1 broken inner valve...
Mine is on a toggle, I have 3 degree's pulled in the COS part of the tune. when I activate the toggle I can see the 3 degrees pulled immediately (as it should).
On the VE multiplier, I have set...
I have had the same problem was it resolved?
I am expeirencing this as well, will check the fuel type on the LC1
I dont believe that gauge has PIDs premade, so you will need to make a calc PID
AFR = (1.4 x Output Voltage) + 9
The above is from their website
...
I can deal with that :hihi:
SO just log Voltage AD1 AD2 and the usual PIDs as well as Relay Status... Then open the log and add the calc PIDs (Fuel Pressure, Nitrous Pressure, and LC1 AFR).
...
Before I download and install BBL, can I BBL
LC-1 AFR
LC-1 AFR Serial in
Calc PID such as Fuel Pressure AD1
Calc PID such as Bottle Pressure AD2
and Relay Status?
I am trying to troubleshoot knock in the 1800-2400 RPM area and higher MAP.
I did the EFI Live Injector load test, and #1 was in the 120's the others were low 140's.
What do the values mean...
It does stay steady (but it does change a couple times if you let it play) do another log with 24 channels. Your logging to many things.
The Log Works here.
You have too many PIDS selected to the scan speed is slowed down.
35 selected using 42 channels, You want 24 channels or less for best scanning.
Some PIDs take up two...
The yellow button is real time monitoring (no recording) and the red is record, gonna guess you hit the yellow? If you hit the red, then I am gonna guess its filtered to show what your viewing. If...
So COS 5 VE multiplier is for SD only? Kind of defeats the purpose of "Nitrous Monitor"...???
OK, two years after starting tuning LOL I m just as confused...
You have the MAF table B0120 set to 4000
So your playing with VE table (increasing for more fuel) to tune out KR in the upper MAP...
new sheet
I can change that if ya like, the password is "nitrous" to un protect it if your a excel guy and want to add those cells your self
I chose to use a switch to active the tune, some choose to have it automatically ground with the noids. Once you get it set up your looking at this table to get around the MAF delete or add fuel w/...
I cannot find where PE MAP enable is...found one if MAP is 15 or higher PE can be enabled, but nothing like enable PE w/ MAP 80-100...I am running a 02 OS for COS5