Hey guys,
My truck has had roughly the same tune in it for years and years, a COS with extra fuel in boost and semi open loop. Lately I noticed it was down on power and the WBO2 didnt move much at...
Type: Posts; User: ls1mike; Keyword(s):
Hey guys,
My truck has had roughly the same tune in it for years and years, a COS with extra fuel in boost and semi open loop. Lately I noticed it was down on power and the WBO2 didnt move much at...
Hey guys,
My truck has had roughly the same tune in it for years and years, a COS with extra fuel in boost and semi open loop. Lately I noticed it was down on power and the WBO2 didnt move much at...
I swear when I checked the compatibility page it said it said 11-14 but for now I double check and see it says 12-14.
I'm trying to read out a ECM with an AutoCal and it just starts and says...
Pretty sure it matters what you switched on/off in the {B0515} table. Turning it all off runs rough and prevents burnouts.
Problem is its the ultrathin ultramodern 2013 model. Total weight 2.9 lbs. Its basically a cell phone, ha! But they must have the amperage cranked very low because I've been using it for a week and...
UPDATE: $4.89 shipped solved my problem, powered usb hub
ebay link: http://www.ebay.com/itm/221264418264?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
It was low power coming off the...
It has 2, they both do it. One seems lower voltage than the other as the v2 screen is very dim and sometimes will not boot on that side (needs a few plug/unplug). The good side can sometimes connect...
Thank you for the reply, the drivers are installed and the v2 communicates when on vehicle power. I just purchased a AC powered usb hub hopefully that will do the trick will post with update.
Hey all,
My v2 works great but with my new laptop cannot be recognized even if the laptop is plugged in to AC power.
v2 works fine when connected to vehicle or desktop pc but obv have some needs...
This is unlike any other emissions thing I have run into and none of the usual tricks seem to be working. No codes. Fails on any scanner.
The list of mods is a mile long, boost, huge injectors,...
Bump, need this to get a sticker.
Like said, this car will not ready the fuel system monitor. (incomplete)
Fuel trims are +/- 5% so that was our main worry and its not that.
15804 Let me know what you find.
Thanks.
got it, had to make a new account.
Hey guys, I recently bought a v6 Saab turbo. The throttle management is so restrictive I want to sell the car!
I was able to pull the stock file out but obviously can't do anything with it.
If...
Plugged the MAF in and it worked fine? So much for running it in speed density. With meth came to just under 600 at the wheels today. (Richest spot commanded only like 10.8 iirc)
Replaced the computer and solved the intermittent starts... who knows.
Wasn't easy had to bring it to a place with a dealer tool to get it to turn over.
sorry didnt explain myself more i was working on it this afternoon.
no matter what is in the PE table the logged (commanded) e38 (not actual) afr just bottoms out at 9.79 flat and wont go any...
its a f1 procharger making 10+ lbs boost with 65 lb injectors and zl1 fuel pumps
the injectors are not hitting 100% duty cycle they are only at ~ 80%
As the title says, how do you command richer than 9.79 in pe? 2010 camaro
My table is set at 6 but the engine wont go less than 9.79. I've tried the injector tables, the vve and the pump pressure...
No crank with the supposedly set up computer, tried key forward for 10 minutes 3x twice, still no crank. Whats the proper procedure for this computer? Should I apply a vats delete patch? I don't want...
Can't reprogram vats or other things? I will be working on this again tomorrow.
No, found a matching vehicle computer will swap this week and see what happens. Fingers crossed.
This vehicle has been to at least 3 tuning shops over time and definitely efilive and hptuners and who knows what else. Could be it, maybe? Lets hope its that simple.
Hey guys been really chasing our tails with this one - been having many weird phantom issues with this vehicle, so many problems not even worth mentioning because if you can imagine a problem it is...
Tried to full flash a vette file in a fbody ls1b (computer swap) with v7 and it kept saying complete without actually flashing. Worked fine in v8 figured I'd mention.