Would go over 30 MPH with that program. I put mine back in and the customer is going to come get it and drive it for now.
Type: Posts; User: RdRacerZ28; Keyword(s):
Would go over 30 MPH with that program. I put mine back in and the customer is going to come get it and drive it for now.
I'll give it a try, didn't know anyone had posted. The Injector table does need some work, someone was in there before me. We dynoed the engine and made sure the WOT and heaver load areas were good...
No change unfortunately..... hopefully someone has run into this before.
I maxxed those out Gregs, I'll give it a try........ throttle is also limited to 25% in park/neutral as well. Test driving now.
No Trouble codes, truck works great just can't accelerate hard until the rpms are up and the throttle opens completely. More importantly, the customer can't do a burn out..... priorities. Any help is...
I built a 5.3 S/C Engine for a customer and everything works well except for one annoying problem.... When in closed loop and below aprox. 2500 RPM the throttle will only open a maximum of 25%. In...
Hoping someone can help me out-
I've installed a 2008 6.0 and transmission into a street rod. I have a timing problem. The engine runs proper timing at idle and part throttle cruise, but as you...