Location?
Type: Posts; User: rgullett83; Keyword(s):
Location?
Find someone with a tech 2 and have them change the tire size in the ebcm to the tallest size available, and that should alleviate the abs light
Is the maf coated in oil from the k&n?
ok just removed sd card, and was able to get them that way:doh2:
I did a search, and came up empty. I have just started BBL, took two logs, come back in, and realize that i cant figure out how to upload to review. I can open efilive explorer, and the two logs...
may want to bump up rail pressure as well
do you still think that there is a table in then 09 TCM's that is limiting rpm?
forgot to update, the reduced engine power message disappeared when the K&N filter was removed and the stock filter was reinstalled. I need to do some work withe the MAF tables I guess
the reduced engine power message was due to K&N filter. But still have the rev limiter issues, and is really annoying. The rev limiter is really holding this truck back from its full potential.
I took the truck to the dealer today, and reflashed it back to stock, and the mysterious reduced engine power message still shows up with the stock tune in it. This message started appearing after...
ok thanks for the info now I feel a little better
ok thanks for the update. I do not have V8. as dumb as it sounds, I downloaded and intstalled it, but could not make heads or tails of it(I hate change even if it is for the good.) I didnt have...
oops sorry, I need to pay a little more attention
I am also having this trouble on an 09 LMM
bump
I should also note, that we keep getting a reduced enginte power message also, but does not set any codes or run poorly, just get the dinging and message, not a big deal but rather annoying. I am...
Thats what I am thinking, but the previous LMMs that I have tuned, have not had rpm limiter issues just this one, and seeing how we cant read the tcm something maybe causing the issue. I did update...
Limiter seemed to remain stock, right around 3250 rpm, I will check mine software for updates tonight, and try again. It is an 8594 OS, same as the 07.5 and up LMM's
Got an 09, that i put charger on, built trans, etc... Took to Danville Performance for Mark Broviak to tune. No matter what was changed, the rev limiter remained stock, all the tables in the ecm for...
Ok I will try that.
Thanks!
That Icon is not available, just the read Icon, and the cal only flash buttons are available. Also I am just curious, as to why Tis wiped out the serial number.
I lied, as I try to reflash the ecm, I get a message that says the ecm's serial number is missing, and that a full reflash is needed. How do I accomplish that? I have tried several times to...
Well I finally got back to the dealer, and reflashed the truck with no problems. I am curious if the ECM had been replaced, and not flashed when installed? I didn't think that was possible but who...
No problem it is on its way Paul
I read the 01 LB7 we bought tonight, and got a weird VIN number. ????i?B??C???0?&J is what is in the VIN box, I read it twice to make sure, and had the same results twice. I went on a test drive...