Search:

Type: Posts; User: pinstripebob; Keyword(s):

Page 1 of 6 1 2 3 4

Search: Search took 0.00 seconds.

  1. You might not have a PID for intake valve temp in...

    You might not have a PID for intake valve temp in your ECM.

    If you're using V7.5, look at all your PIDs, make sure you can see all of them, not just supported. Then click on the "Units" header to...
  2. My dumb self figured out why my BEN wasn't...

    My dumb self figured out why my BEN wasn't working in V8. I had a precision of 2 setup for the calculated PID, but it defaulted to -1 in the charts and 0 in the maps. Changed the precision in my...
  3. I did some more testing with this, I found a...

    I did some more testing with this, I found a couple odd things.

    For the V7.5 scanning, I found the following:
    - When logging, the Data tab shows N/A for intake valve temp and injector temp. ...
  4. Is this related to table B0147? I'll need to log...

    Is this related to table B0147? I'll need to log injector tip temperature, but B0147 is a multiplier to open loop commanded AFR based on injector tip temperature, similar to the discussion in that HP...
  5. Issue Logging Intake Valve Temp & Calculated AFR BEN with E38

    Hi all,

    I've been running into an issue lately, I was able to spend a little time with it today trying to troubleshoot what was going on. I have two problems as follows:

    1. In V7.5 and V8, I...
  6. Replies
    10
    Views
    561

    Scaling is different for each MAP sensor. For the...

    Scaling is different for each MAP sensor. For the LS1 controller, you might need to flash a custom OS for MAP scaling parameters to be available. Can you post a copy of your tune? Do you have part...
  7. Replies
    43
    Views
    3,146

    Good deal, our cables are a little different but...

    Good deal, our cables are a little different but you should be good to go once that adapter arrives. Plug it in, select those external serial wideband PIDs, and get a log. Should be as easy as that....
  8. Replies
    43
    Views
    3,146

    Amazon or any local electronics store should have...

    Amazon or any local electronics store should have them. You can see the one I use in the link below:
    ...
  9. Replies
    43
    Views
    3,146

    You need a null modem adapter, then plug it into...

    You need a null modem adapter, then plug it into the serial input of your Flaahscan. Log the LC1 external wideband PIDs.

    Sent from my Pixel 3 using Tapatalk
  10. Replies
    43
    Views
    3,146

    I got busy getting my supercharger buttoned up. ...

    I got busy getting my supercharger buttoned up. My wife and I are leaving with the car tomorrow for a long weekend trip. I had a chance to review your tune really quick.

    Most of my time spent...
  11. Help getting RPMs to drop more quickly between shifts E38

    Hi all,

    I've done a bit of tuning with LS1B controllers in the past with cable driven throttle bodies. I got a 2016 Chevy SS with a manual transmission, and the RPMs seem like they hang or fall...
  12. Replies
    43
    Views
    3,146

    You're making headway, keep it up. If it's your...

    You're making headway, keep it up. If it's your first time working with EFI it's a steep learning curve, keep working at it!

    Your log has very few PIDs, all of them except your long term fuel...
  13. Replies
    43
    Views
    3,146

    Yep that should be right. Make sure you have an...

    Yep that should be right. Make sure you have an IAT plugged in though. I assume you got that from the tutorial shown here: https://forum.efilive.com/showthread.php?8961-E38-VVE-Setup-Guide

    Keep...
  14. Replies
    43
    Views
    3,146

    Great! For both of those logs, if you open them...

    Great! For both of those logs, if you open them up and go to the Data tab, you'll see values for pretty much everything you have selected. You have a lot of PIDs selected that probably won't be...
  15. Replies
    43
    Views
    3,146

    Oh shoot! Well hopefully that heals up quickly. ...

    Oh shoot! Well hopefully that heals up quickly.

    Sent from my Pixel 3 using Tapatalk
  16. Replies
    43
    Views
    3,146

    I was a bit stumped on this, but I have two more...

    I was a bit stumped on this, but I have two more troubleshooting methods we can try. Do the following:

    1. Go to your PIDs tab, find the PID with the description "Air/Fuel Ratio Commanded" and the...
  17. Replies
    43
    Views
    3,146

    Interesting. This might seem like a silly...

    Interesting. This might seem like a silly question, but can you click on File>Select Controller and make sure it's set to E38? From your first post, that's the ECM you're using.

    Sent from my Pixel...
  18. Replies
    43
    Views
    3,146

    They'll be supported, might have a weird...

    They'll be supported, might have a weird description. Make sure you're connected to your car, where you can press log or record and it will start doing a log.

    If you still have issues, take a...
  19. Replies
    43
    Views
    3,146

    Not a problem, there is a very big learning...

    Not a problem, there is a very big learning curve, but the more you play with it the better you'll become.

    There may be more PIDs that become "supported" but rely on other PIDs to be selected...
  20. Replies
    43
    Views
    3,146

    There are a few ways to view all the information...

    There are a few ways to view all the information you're looking for, and there are a ton of options for what you can view. I would definitely read through the V7.5 Scan Tool manual a couple times,...
  21. Can you post your tune? What converter are you...

    Can you post your tune? What converter are you using? Have you changed or modified the throttle body? Have you adjusted the set screw on the side of the throttle body?

    Sent from my Pixel 3 using...
  22. Thread: Aldl help

    by pinstripebob
    Replies
    4
    Views
    515

    Do you have the factory wiring diagram? I have a...

    Do you have the factory wiring diagram? I have a 1984 El Camino and can take a look in my service manual if that would help.

    Sent from my Pixel 3 using Tapatalk
  23. Replies
    0
    Views
    1,108

    2018 E80 Chevy Cruze

    Hi all,

    A friend of mine has a 2018 Chevy Cruze with a 1.4l turbo engine. I plugged EFILive in to take a peak at the factory tune, and it looks like I need to purchase an authorization code to do...
  24. Replies
    39
    Views
    3,124

    Good! Keep it up! Sent from my Pixel 3 using...

    Good! Keep it up!

    Sent from my Pixel 3 using Tapatalk
  25. Replies
    39
    Views
    3,124

    Can you make a map that shows your wideband's AFR...

    Can you make a map that shows your wideband's AFR or EQR plotted against RPM and MAP? This should show if you're seeing reasonable values from your wideband.

    Also, are you applying the CALC.VET...
Results 1 to 25 of 128
Page 1 of 6 1 2 3 4