Search:

24591
24592
24592

Main timing was derived from AH64's spreadsheet calculator.

I need to rework the pilot timing scale and values because it's too close to my part throttle shift point and...

Well, my laptop is having an issue. I'll post up as soon as I get it rolling again.

Sent from my motorola one 5G using Tapatalk

Getting ready for traveling season. I've been working on a "daily driver tune" to net better economy. I will post what I have for mapping when I gain access to my laptop again. I currently have pilot...

So I went through HP checking limiters for the CM849. I think I only found three that don't appear to have an equivalent in EFI.
I tried to flash a modified base file with HP, but I'm out of...

There's what I'm after.
The description you have is the same as the document I have.

I just modified the lambda table a night or two ago.

Sent from my motorola one 5G using Tapatalk

Well, I agree about the logging, which I'm fairly certain those of us involved in the thread to this point have been doing, myself for over a year now. You can see in at
least one of my images...

I have a file ready to modify. Interesting that the fan controls are available in HP but not EFI.

Let me know if you have any luck shutting off the governors. I plan to try this weekend.

Sent...

It looks similar to me.

Sent from my motorola one 5G using Tapatalk

Excellent. Let me know if there is anything I can do to help. I'm checking to see if I have an HP credit left now.

Sent from my motorola one 5G using Tapatalk

I have a good deal of the relevant posts here and on CompD book marked.



Sent from my motorola one 5G using Tapatalk

Can I load an HP base file into an ECM with the CSP5 patch, or will I need to flash back to stock first?
I assume I need to configure a stock file in HP, flash it, read out with EFI, and then...

I may try this. I retooled a manual file to match my auto file and it still has the same status code derate under heavy throttle.
Once it hits 115mm3 fuel position, it changes from an exponential...

I wish there was. I have so many questions.

Sent from my motorola one 5G using Tapatalk

I had input on another forum that suggests the changeover is tied to minimum firing rail pressure.

Sent from my motorola one 5G using Tapatalk

How does the ECM determine whether to reference the cranking or main timing table at startup? I assume there must be some rationality beyond just RPM because the cranking RPM scale overlaps so much...

This may be a disregard. I had the though that my issues didn't begin until I swapped to a 64gb SD card. I connected to my laptop with the same issue. I popped the card and adapter out and powered it...

I've been experiencing an issue where upon connection to the DB9, the flashscan will illuminate the LEDs, the backlight will come on, but no splash screen, and then several seconds later, the menu is...

Sorry for the late reply, but thank you for the response. Is this to say that HP does have these limiters exposed? Even with a CAX, is this due to the lacking TIPM comm? I suppose one could tune...

24276

I found another log that appears to be 1500uS. I am going to get another log today as this one is over a year old.

Bumping this up. Has any resolution been found for this? I'm finding that on the logs from my OS that the transition from governor status 7 to governor status 45 is tied directly to crossing any...