I may have just forgotten having been out of the tuning/calibrating world for a while and doing supporting hard parts design and manufacturing. The last few VIN changes were ECMs so I clearly didn't...
Type: Posts; User: TBMSport; Keyword(s):
I may have just forgotten having been out of the tuning/calibrating world for a while and doing supporting hard parts design and manufacturing. The last few VIN changes were ECMs so I clearly didn't...
ROSS!!! YOU BRILLIANT, HANDSOME, MAGNIFICENT MAN, YOU!! *BIG HUG* THANK YOU! Fixed! Now I just have to remember to do it this way! :)
Ok 2 things are drastically different.
When using V8, this is what I am doing and encountering. I READ the TCM, do the ignition shutoff, let it countdown, let the file open up and then go to...
23101
23102
I am doing benchtop. I am waiting the required 15-20 seconds. I am waiting minutes. I am waiting hours. I am turning switch ignition off, with main power still on. I am doing all kinds of...
So when I change the VIN (either in v.75 or Tune Tool Properties) the original VIN is still showing in the TCM when I perform an F2: Read. I have done a Cal Flash, Full Flash and a Flash in V2. It...
Ross,
It's resolved. The issue was that I had too many files each with too many windows open. Switching back and forth through the windows and tabs caused some hang ups of the updates to show even...
Just to clarify, the Calibration and Transmission Diagnostic parameter DO actually change in the OS Full Reflash, but it will NOT reflect that change on the main reading window (i.e. I will have to...
Hey guys. So I'm attempting to reflash a T43 (programmed by GM July 2018) with a different CTZ file that has the same OS, but a different Calibration (older) number. A CALIBRATION ONLY or FULL FLASH...
Got it. I recognize the technical aspects of "the process" are not generally shared due to it completely confusing the casual hot rodder -turned- tuner, but having done so many 6 speed swaps and...
So if I'm understanding this correctly, it's conceivable that, in strictly using EFILIVE, I could have programmed one OS over another without a problem, but can't necessarily put it back due to the...
:rockon::rockon::rockon::cheers::cheers::cheers:
THANK YOU! You have confirmed something that I have suspected over the past few years. I personally have specifically focused on 07-08's T43's...
Ok.either way, I still cannot full flash the T43 even with V8 as it tells me the OS is incompatible.
Additionally, I now am unable to Full Flash a T43. I wish to put the original 24239353 that was previously changed by a shop to 24249179, however I can no longer do it since everything has gone to...
Bump for an answer. Thanks.
Sorry, real life got in the way.
The OS's are:
12618164
12611938
Yes, sir, with EFILive. It's been a while since I last had to do it and it was before I recently upgraded the firmware and boot, but yes I've done it multiple times including my personal trucks. So...
I understand that, but I have overwritten this OS' s before. Is this due to the fact that it's not a .tun file?
Controller was/is setup for E67. I'm attempting to full program the same type of E67 ECM. The ECM has an 2007 tune in it I'm trying to overwrite it with a 2008. I did only copy over the file into...
I loaded my AutoCal saved ctz file into my autocal, unplugged it, and then attempted to do a full program directly from the AutoCal, I got that message "OS FAULT ABORTED". What am I doing wrong? ...
Ok...mine started acting up again and giving me the same error when I attempt to plug into my E67's (in vehicle or benchtop). However there is no issue when plugging into my LS1 PCM in my '99...
Thanks for the quick response, Ross. Good to know for the future. Problem is, the TCM was sent to me as a "blank" disposable TCM, so I didn't bother to pull the actual original calibration file from...
Ok...customer sent me their TCM T43 to be programmed. I used an AutoCal to do so and sent him the TCM back with the AutoCal. It was a few months since the order was fulfilled. He decided to go a...
Gotcha. Thanks...let me figure out how to save this and make a ticket.
Hey Paul,
I can communicate via V8 and was able to pull up the licensing info. However, whenever I hit the CTRL+OK all I get is a yellow light flash (on the 2nd from the right light). No screen...