Search:

Type: Posts; User: gmh308; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Sticky: it is worth pushing your VVE table up and down....

    it is worth pushing your VVE table up and down. For example try 15% up and see if it gets better. SD MAF on scan should match Real MAF. Roughly that is. If your setup has moved the airflow away from...
  2. Sticky: Something like this probably easiest: ...

    Something like this probably easiest:

    https://www.altronics.com.au/p/q1542-pocket-size-audio-signal-generator/

    Anything that will at the very least generate a 50-150Hz square wave.
  3. Sticky: Wow 46,000+ views - the second most popular...

    Wow 46,000+ views - the second most popular non-sticky thread on the forum. :O . I see some folks even built businesses out of the EFILive Flex Fuel information on here.

    Anyway, back to the...
  4. Replies
    4
    Views
    662

    Thats right, it limits at the torque number via...

    Thats right, it limits at the torque number via throttle limiting in the respective gear at the particular RPM.

    Traction control when you dont have traction control ;)
  5. Replies
    14
    Views
    1,841

    The cal is set for serial data in the image - is...

    The cal is set for serial data in the image - is that what you have set it up for?
  6. Replies
    1
    Views
    555

    It shouldn't need to be re-learned manually. It...

    It shouldn't need to be re-learned manually. It should "just" work. Does the throttle blade operate full sweep as you stroke the pedal? Are you sure it is the right pedal for the calibration in the...
  7. Replies
    4
    Views
    1,095

    That looks like the FPCM unit in the engine...

    That looks like the FPCM unit in the engine harness pic, this is a T87 shown with the trans yes? :-

    21749
  8. Replies
    4
    Views
    1,095

    Fingers crossed they are not E92A and T87A...

    Fingers crossed they are not E92A and T87A controllers. If E92 & T87, should be AOK! ;)
  9. Replies
    20
    Views
    2,956

    You can't edit the HPT Custom OS based file -...

    You can't edit the HPT Custom OS based file - last 4 digits 0233, so you will need to find an equivalent EFILive .ctz or .tun file - which were available on tunefiledepot.com but it appears to have...
  10. Have you checked scan to see if the injectors are...

    Have you checked scan to see if the injectors are pulsing? The ECM knows the engine is cranking via the crank pulse. If you have added air flow via a larger TB, then likely you need to add...
  11. If its a Speartech harness it will be fine! ;)

    If its a Speartech harness it will be fine! ;)
  12. Good thanks Joe! ;) You? Good winter there in So...

    Good thanks Joe! ;) You? Good winter there in So Cal?
  13. What Joe said Pat, but not knowing what you have...

    What Joe said Pat, but not knowing what you have in the 12612381 OS, i.e. which areas are revised, best to leave the 12617631 idle & ETC area etc alone. At least initially. As they are different...
  14. What is the original Holden OS for ECM and TCM?...

    What is the original Holden OS for ECM and TCM? Some items may be applicable, some not.
  15. Per other thread - if ECM at fault - quite...

    Per other thread - if ECM at fault - quite unusual. More likely wiring if you already changed the O2 sensor out. Surprising that Diag systems is not detecting the lazy O2 signal. Normally the diags...
  16. Replies
    18
    Views
    5,536

    If it was an ECM problem - would be the first I...

    If it was an ECM problem - would be the first I ever heard of. :)

    What Joe said ^^^ :)
  17. Replies
    18
    Views
    5,536

    LOL great thanks Joe. Your spelling & grammar...

    LOL great thanks Joe. Your spelling & grammar looked fine. :)
  18. Replies
    18
    Views
    5,536

    What Joe said ;).

    What Joe said ;).
  19. Replies
    12
    Views
    3,758

    Yes what Joecar says is correct. Anything out of...

    Yes what Joecar says is correct. Anything out of 06/07 12597121 stays there. Early 06 E38 = kryptonite. (12603892? IIRC - careful) 08-12612384 09-12625455 10+ 12633238.

    E38 got planned 03-04 -...
  20. Thread: E38 Diagnosis

    by gmh308
    Replies
    5
    Views
    1,715

    It really comes down to CAN and power. Have never...

    It really comes down to CAN and power. Have never seen a dead E38 that wouldnt say hello - but first time for everything. :)
  21. Thread: E38 Diagnosis

    by gmh308
    Replies
    5
    Views
    1,715

    Did you select E38 manually or allow auto detect...

    Did you select E38 manually or allow auto detect to find it?
  22. Replies
    5
    Views
    3,017

    Are you running a T42 or the TC2 controller in...

    Are you running a T42 or the TC2 controller in the instructions?
  23. Thread: E38 Help...

    by gmh308
    Replies
    4
    Views
    1,733

    That's a cool transplant. Should haul along real...

    That's a cool transplant. Should haul along real nice! :rockon:
  24. If you just want to VATS patch the 2010 ECM and...

    If you just want to VATS patch the 2010 ECM and start the C6 - probably AOK (apart from maybe the MAF type in the Camaro being different to the C6 blade MAF).

    Expanding on what Ross mentioned -...
  25. Replies
    33
    Views
    24,366

    Sticky: Weird. Normally if ECM sees no CAM with Crank,...

    Weird. Normally if ECM sees no CAM with Crank, DTC pops up. Echoing Joecar, thanks for reporting back your finding. Great to know!
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4