Heys guys
I’m having trouble locating a stock file for a 2016 3500 cab chassis truck.
Boot sw. 12664192
Main os. 12669774
Engine. 12660135
Speedo. 12660471
System. 12660408
Fuel. ...
Type: Posts; User: Ltcbm; Keyword(s):
Heys guys
I’m having trouble locating a stock file for a 2016 3500 cab chassis truck.
Boot sw. 12664192
Main os. 12669774
Engine. 12660135
Speedo. 12660471
System. 12660408
Fuel. ...
Yeah I assumed, thus my stupid reply
Never any trouble opening the file Jim posted. Just when it loaded it gave that error and said ecm had no os
24182
Jim
I tried that file and it errored and said checksum failed. I have worked on this for a bit now and it has stumped me.
I couldn’t see where any torque management was pulling fuel. It is very weak till third gear then it seems to come alive pretty good. I am assuming it is done trans TM but I can’t find where it is
I have a 2014 cab/chassis 3500 here that I deleted and tuned. It is very weak and no matter what adjustments i make to the fuel and timing table it's makes no difference in the truck.
I have the...
Does anyone have a file with a dirrerent is that would work on this truck. It is a c&c 5500. Can’t seem to find a good one
I have a customer that brought a 2008 c&c here that the controller has been flashed with a smarty and I cant get into. Does anyone here have a clean read from a 805 os. I could not find one in depot...
Anyone know a way to change vin on an 2003 Cummins. I have not been able to get my pass thru pro2 to do it or get the dealer too. Hptuners cant either. Swapped Ecu and need to change vin. Any ideas
I have both but never tried to read a e40 after maf patch. It should read it. It may show that part of the file to be corrupt or out of range. try it and see.
It is a can bus speefo. It shows vss and rep speed signal. And I have enough sends speed signal box checked. The scanner shows all this but there is no way of telling what is being sent to cluster...
Yes, org it had a e37. I tried to get this thing working with efilive but it required several segment from the e37 to be merged / replaced with the e67 for it all to cummunicate and work correctly. I...
Or a 09 solstice auto file
To give a quick background on whats going on. I have a 09 Saturn sky that I have put a LS in. I used a e67/T42 and I now have everything working including trans but no speedo. All the modules are...
To give a brief description of what I'm doing before I get to the question. I have a 09 Saturn sky (came with e37 not e67) that I have put a ls3 in. I used a e67 ecm and built the harness and...
I hope that's not the case with this one. I have not yet got it to link to the bcm for everything to work yet. I have the vin from the car in the ecm. I have tried using gm's sps and efilive both to...
I swapped the os with pass thru using sps. It did crank and run.having trouble with idle but that I can work thru. Still don't know the why but it runs now though
I'm gonna hook a snap on pass thru pro2 to it tonite and see if it will flash. Worst case is I'll brick the ecm. But if it don't work I'll have to get a ctsv ecu anyway. Just have already bought...
Is a tech2 the only way to flash a ctsv ls2 os on it? Efi live will not because os not compatible.
I didn't save the ls4 cam gear since it was vvt. I made the assumption that they were the same. But you know what they say about assuming
I just installed a ls4 in a project I'm working on. Using the 09 Impala ss e67. I put a ls3 cam and gear in it along with a ls3 timing cover. My question is: the cam position sensor on the ls4 cover...
From what I understand the E37 and the E67 have the same architecture. So is it possable to flash a e67 os on the E37? Never have tried or heard of but they are making this work somehow.
I am converting a 09 sky with a e37 ecm. I see where a couple of places are taking the org ecm and reflashing it for the swap so the bcm will still communicate and all the cars controls will still...
I have a car I'm doing a large swap in and it had a t68 tcm controlling a 5l40e trans. Can the t68 be reflashed to control a 6l or even a 4l ? Can't find much info on the t68