Search:

bootblock version 2.07.03 firmware version 2.07.22

I did notice my flashscan v2 doesnt have "com in" and "com out" settings. It only has "com port" which i changed to "wide-O2".

So I followed the tutorial to the T and I'm not getting the led 2 from the left (communication) light blinking. My WB gauge works but for some reason I cannot log the wbo2 pids because I have no...

hmm for some reson the update links arent working for me.

So my current tune on the truck has an OS # of 02606494 and the holden crazy tbss stock tune has a OS# of 12606494. They are both E40 PCM. If I start from scratch with the holden crazy stock tune I...

Found a loose ground for the LC-1 which was causing my low AFR numbers.

OK, so its normal to be off by one. Was just making sure. It wouldn't make sense to have a two different OS#'s for the same PCM on the same year, make, model vehicle.

I am looking for a stock 2006 TBSS e40 pcm file. I found one on holden but the OS # doesn't match up and is off by one number. How or why would this be? Maybe a typo? I would like to start from...

ok I nailed the TCM tune down and am very happy with it. Now I installed my WB02 and opened a whole new can of worms.... My truck is idling at an A/F ratio of 8.5 while warm... found a loose gbround...

In 4th the converter locks back up based on MPH in my tune so as long as I resume a certain MPH at a certain TP% the converter will lock back up. slow67, do you have an example of the TCC apply ramp...

Thanks Erik, I'm going to stick with my current OS for now. I almost have my shift points tuned perfect, Ill play with the ramp rate at +/- 10% at a time to see what works. I locked my converter in...

Im tuning the TCM 42 on my 06 TBSS with a built 4L70e and vig 3600 3-disc lockup. I believe I have everything figured out with the exception of the TCC apply(ramp) rate table. What is everyone doing...